arfa Posted June 7, 2023 Share Posted June 7, 2023 Hello ironcad community, 1.Can i put an image or company logo on this table drawing ? 2.Can i set as default drawing template that i modified? Thank you and Forgive me if my English is not good. Quote Link to comment Share on other sites More sharing options...
IronKevin Posted June 7, 2023 Share Posted June 7, 2023 Just drag and drop the image on the sheet. Save as Template (the template folder can be found in Options, Directories. Quote Link to comment Share on other sites More sharing options...
arfa Posted June 7, 2023 Author Share Posted June 7, 2023 Thank you so much ironKevin , it is very helpful. Quote Link to comment Share on other sites More sharing options...
arfa Posted June 7, 2023 Author Share Posted June 7, 2023 Sorry @IronKevin I have saved as a template with a picture, but when I use the template on a new drawing, the picture is missing, may I know why? is the picture not allowed to be saved as a template? Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted June 7, 2023 Share Posted June 7, 2023 (edited) 2 hours ago, arfa said: Sorry @IronKevin I have saved as a template with a picture, but when I use the template on a new drawing, the picture is missing, may I know why? is the picture not allowed to be saved as a template? Hi arfa, Hm... a picture with template is working at here, can you record your screen with process? Kim Edited June 7, 2023 by Bertrand Kim Quote Link to comment Share on other sites More sharing options...
arfa Posted June 7, 2023 Author Share Posted June 7, 2023 1 hour ago, Bertrand Kim said: Hi arfa, Hm... a picture with template is working at here, can you record your screen with process? Kim Hi @Bertrand Kim, sorry that my laptop has a little problem to record the screen but I will explain how I do it 1. I modified the sheet by placing a picture 2. then I save it as a template for catalogs 3. then I move the file in the template file just like the file that is directed in the directories 4. then I made a new drawing using the template I had saved a while ago and what I got was no picture in the drawing is my way correct? forgive me if you are still not clear Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted June 7, 2023 Share Posted June 7, 2023 (edited) Yes, I also lost my picture when I followed your method. Try to save the template with "Save As" tool instead "Save as Template for Catalog" I'm sure tew new tool "Save as Template for Catalog" that is deliveried with IronCAD2023 makes lost a picture. bandicam 2023-06-07 18-51-55-371.mp4 Kim Edited June 7, 2023 by Bertrand Kim Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted June 7, 2023 Share Posted June 7, 2023 7 hours ago, IronKevin said: Just drag and drop the image on the sheet. Save as Template (the template folder can be found in Options, Directories. Hi Kevin, when do we need to use "Save as Template for Catalog" tool instead Save? What's different? Quote Link to comment Share on other sites More sharing options...
IronKevin Posted June 7, 2023 Share Posted June 7, 2023 "Save as Template for Catalog" should be for if you are going to add the sheet to the Catalog. Quote Link to comment Share on other sites More sharing options...
SSIMMONS Posted June 7, 2023 Share Posted June 7, 2023 I am not sure why this isn't working, but we use an image and have for years. I may suggest trying several different/ common file extensions for your image. If you are not well versed in changing image formats easily, something like convertio can be used to do it for you. Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted June 8, 2023 Share Posted June 8, 2023 11 hours ago, IronKevin said: "Save as Template for Catalog" should be for if you are going to add the sheet to the Catalog. Thanks Kevin, is it a bug that the "Save as Template for Catalog" tool can't save pictures to ICD file, or is this intended behavior? Quote Link to comment Share on other sites More sharing options...
arfa Posted June 8, 2023 Author Share Posted June 8, 2023 14 hours ago, Bertrand Kim said: Yes, I also lost my picture when I followed your method. Try to save the template with "Save As" tool instead "Save as Template for Catalog" I'm sure tew new tool "Save as Template for Catalog" that is deliveried with IronCAD2023 makes lost a picture. bandicam 2023-06-07 18-51-55-371.mp4 12.98 MB · 0 downloads Kim Thank you so much , its worked Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted July 5, 2023 Share Posted July 5, 2023 On 6/8/2023 at 9:34 AM, Bertrand Kim said: Thanks Kevin, is it a bug that the "Save as Template for Catalog" tool can't save pictures to ICD file, or is this intended behavior? ???? Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted July 21, 2023 Share Posted July 21, 2023 On 7/6/2023 at 12:55 AM, Bertrand Kim said: ???? ???? Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted July 28, 2023 Share Posted July 28, 2023 On 7/22/2023 at 12:59 AM, Bertrand Kim said: ???? ???? Quote Link to comment Share on other sites More sharing options...
IronKevin Posted July 28, 2023 Share Posted July 28, 2023 Bug filed. QA 78390 1 Quote Link to comment Share on other sites More sharing options...
Bill C Posted July 31, 2023 Share Posted July 31, 2023 The Save As Template for Catalog command was created to allow users to create Drawing Title Block catalog items. Like the ones in the ANSI Templates and ISO Templates catalogs. This command is different from the normal Save As because it only saves drawing elements that are assigned to a Layer with the Template option ON. Note that by default, when images are dropped onto a drawing they are put under a Group and the Group element does not have a Layer assignment. We group the image to more easily resize it. After the image is resized, you can UnGroup it and assign the image directly to the Logo layer (which by default has the Template option ON). To add an ICD to the Catalog, you use the Object command in the Right Mouse popup menu in a catalog. Select "Create from File". Then Browse to the ICD that was saved using the Save as Template for Catalog command. A3-logo.icd 1 Quote Link to comment Share on other sites More sharing options...
Bertrand Kim Posted August 7, 2023 Share Posted August 7, 2023 On 8/1/2023 at 12:42 AM, Bill C said: The Save As Template for Catalog command was created to allow users to create Drawing Title Block catalog items. Like the ones in the ANSI Templates and ISO Templates catalogs. This command is different from the normal Save As because it only saves drawing elements that are assigned to a Layer with the Template option ON. Note that by default, when images are dropped onto a drawing they are put under a Group and the Group element does not have a Layer assignment. We group the image to more easily resize it. After the image is resized, you can UnGroup it and assign the image directly to the Logo layer (which by default has the Template option ON). To add an ICD to the Catalog, you use the Object command in the Right Mouse popup menu in a catalog. Select "Create from File". Then Browse to the ICD that was saved using the Save as Template for Catalog command. A3-logo.icd 1.99 MB · 2 downloads Greate, Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.