MRAHM Posted March 17, 2020 Share Posted March 17, 2020 Hello In order to get correct BOM list I need to use the "Treat as part" function. This works great but when there is multiple instances of an assembly we need to repeat the procedure many times. Check movie about the issue. Select many assemblies and apply this configuration one time would be helpfull. /mikael 200317_10-27_298.mp4 Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted March 17, 2020 Share Posted March 17, 2020 If you have IronCAD Mechanical, the ProActiveManager will allow you to multi-select in the tree and change the expansion type to/from Expand to Treat as Part. This tool is in teh IC Mech Tools catalog. Best Regards, Cary Quote Link to comment Share on other sites More sharing options...
MRAHM Posted March 17, 2020 Author Share Posted March 17, 2020 Thanks Cary for a solution! Quote Link to comment Share on other sites More sharing options...
MRAHM Posted March 18, 2020 Author Share Posted March 18, 2020 If it was possible to choose within IronCAD it would be faster and in my opinion simplier. I´m happy everytime I don´t need to use catalogs. They are slow to work with. IC2020 is better with the possibility to have multiple catalogs active. Thanks for your tip! Quote Link to comment Share on other sites More sharing options...
GNÄSLUND Posted March 18, 2020 Share Posted March 18, 2020 Tips: If you select the front view when creating the BOM, you can choose "Top Level Only". This might be what you actually want. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.