mwalls558626 Posted June 24, 2010 Share Posted June 24, 2010 As I was doing some custom BOM work, I came across a format issue that I cannot seem to change. There are lines missing in the column when using the indented list format on the drawing. It was showing up on my custom template, but it also is the same on the default template. I usually do not use the indented list on my drawings, but this is not right. See attachment. Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted June 24, 2010 Share Posted June 24, 2010 We think there is an update issue in the indented list BOM that may be related to this. Can you try the following. When you have this state, right-click on the BOM and go to properties. Change the configuration to Default. Hit ok. Does it correct the issue? If so, it will fail on the next update (in the event you can toggle the configuration back to no configuration selected). Please let me know. Cary Quote Link to comment Share on other sites More sharing options...
mwalls558626 Posted June 24, 2010 Author Share Posted June 24, 2010 Ok, here is what happens. When I go to properties, and change configuration to Default, nothing changes when I come back to the sheet. If I hit update after, I get what you see in the attachment. If I do nothing but right click on the BOM, hit update, I get what you see in the attachment. It corrects the line issue, but puts the 2 lower level parts in the wrong spot. They should be under the A0001 part, not on their own at the end of the BOM. Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.