tlehnhaeuser Posted October 9, 2006 Share Posted October 9, 2006 I am looking for very high quality /resolution images of IronCAD renderings. I am putting together a Calendar and want to put this in it. One for each month I need. Its your time to shine and have your IronCAD work displayed on others users walls. The images could be any format. Feel free to submit to tom@magnacad.com Thanks Tom Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted October 11, 2006 Share Posted October 11, 2006 Tom, I believe I have a few at home - will check tonight. Best regards, Dave Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 11, 2006 Author Share Posted October 11, 2006 Looking forward to it. So Far only Max has submitted some. Come on guys/gals, I'm sure theres some works of art out there just waiting for the 15 minutes of fame ;-) tom Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 11, 2006 Author Share Posted October 11, 2006 I want to add to the requirements if I may. I would like images with Transparent backgrounds. the size of the finished graphic box is 3.9" x 3.9". So if you can size it to this it would be helpful, if not I'll try my best to modify. Also note that any images that make the cut and get selected you will be asked to sign a disclosure agreement stating you have allowed us to use the images and do nt accept any responsiblity for any design infringements, proprietary information, etc... thanks Tom Quote Link to comment Share on other sites More sharing options...
fcarnley Posted October 13, 2006 Share Posted October 13, 2006 Tom, Would this include Art other than Mechanical Design? Frank Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 13, 2006 Author Share Posted October 13, 2006 Tom, Would this include Art other than Mechanical Design? Frank 15985[/snapback] Hi Frank It can be ANY image generated using IronCAD/Inovate Only. I don;t want any images enhanced in any other 3rd party app suh as photoshop. I will allow in photoshop is to make background transparent if needed. Thanks Tom Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 13, 2006 Author Share Posted October 13, 2006 (edited) FYI _ I would also except images that are in an environement hence a transparent background is not warranted just like the epicture here: http://www.magnacad.com/SoftwareDivision/I...er_on_Bench.jpg thanks Tom PS: Here a sneak glimpse of that layout. Each box would have a picture and is poster size of 23"W and 35" H Edited October 13, 2006 by tlehnhaeuser Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted October 14, 2006 Share Posted October 14, 2006 Tom, As I look at the images I saved. I realized that most of my renderings were created while I was working for my previous employer. The former owner may still be working there as a consultant, so I will give him a call or email him to see if it is okay to submit them to you. I'll let you know.... Best regards, Dave Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted October 20, 2006 Share Posted October 20, 2006 Tom, I sent you an image the other day. Did it get through? (it's pretty big) Best regards, Dave Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 20, 2006 Author Share Posted October 20, 2006 H Dave, yes I got it, sorry haven't had to respond to you. Thats goes to Jan also, still so far its a weak turnuot. Quote Link to comment Share on other sites More sharing options...
Mike Twining Posted October 20, 2006 Share Posted October 20, 2006 so far its a weak turnuot. 16060[/snapback] You probably shamed away all the potential pictures with some of the various examples you have posted to this site in the past! Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted October 21, 2006 Share Posted October 21, 2006 You probably shamed away all the potential pictures with some of the various examples you have posted to this site in the past! 16062[/snapback] C'mon, Mike - you of all people, the IC master of California, MUST have some great images....give em up! Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 23, 2006 Author Share Posted October 23, 2006 You probably shamed away all the potential pictures with some of the various examples you have posted to this site in the past! 16062[/snapback] Mike, I agree with Dave, give em up Besides, I stand here with my hands in my pockets, kicking the dirt, and here Davy Jones music in the background. Quote Link to comment Share on other sites More sharing options...
Mike Twining Posted October 23, 2006 Share Posted October 23, 2006 ...I'm not much on the "finish work". I'll frame a house all day, but good luck trying to get me to paint it... it just takes soooo much work to get just right, and I don't have the patience to do it... that and I don't have anything cool to show off. Quote Link to comment Share on other sites More sharing options...
mmccall Posted October 24, 2006 Share Posted October 24, 2006 Had some family issues.. will get them this weekend.. I promise.. Quote Link to comment Share on other sites More sharing options...
fcarnley Posted October 29, 2006 Share Posted October 29, 2006 Tom, I did this one for my Granddaughter about 2 1/2 years ago. I have been using this software since it began years ago. Frank Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted October 31, 2006 Share Posted October 31, 2006 Tom, I did this one for my Granddaughter about 2 1/2 years ago. I have been using this software since it began years ago. Frank 16145[/snapback] VERY NICE, Frank! dave Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted October 31, 2006 Author Share Posted October 31, 2006 Frank, these are great! It appears you have a good handle on creating fairly complex geometrys in IronCAD. Thank you Tom Quote Link to comment Share on other sites More sharing options...
mmccall Posted November 3, 2006 Share Posted November 3, 2006 HA.. thats good... Dave / Tom.. you need to let IC use it.. with a statement.. "STOP SWIMMING AGAINST THE CURRENT... USE IRONCAD" OR "GO WITH THE DESIGN PROCESS FLOW" maybe show some unhappy .. straining fish.. in another caption.. and say (typical Pro-E user)... you know.. designing against the current.. HA.. maybe a pic that has a fisherman.. with a hook with a little sign "ALL YOU CAN EAT .. PRO-E"... then say.. "DON'T GET HOOKED.. " HA!.. of course meaning.. SUCKERED.. BAMBOOZLED.. CHEATED.. SCAMMED... Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted November 9, 2006 Share Posted November 9, 2006 Okay, mm, Step AWAYYYYYY from the espresso........... Quote Link to comment Share on other sites More sharing options...
mmccall Posted November 9, 2006 Share Posted November 9, 2006 HA.. yeah.. really.. forced to be hooked on pro-e.. I run my laptop with the desk top.. IC and Algor.. then Pro and Mechanica.. day in and day out.. Insanity follows shortly after.. the pro/mechanica session.. Quote Link to comment Share on other sites More sharing options...
dsulli555357 Posted December 6, 2006 Share Posted December 6, 2006 Hey, Tom. It's getting close to the new year! What's up with those calenders? Let us know how much they will be! Dave Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted December 6, 2006 Author Share Posted December 6, 2006 (edited) Hey, Tom. It's getting close to the new year! What's up with those calenders? Let us know how much they will be! Dave 16438[/snapback] Hi Dave, Still a work in progress, they are about 90% complete. I will need to send our release apps to submitters to use. I am trying to get some more images before do this. Once they are done. they will be posted on http:www.cafepress.com/magnastuff I will also notify everyone here and thru our e-newsletter. Thanks fro kicking me, I need every so often. Thanks Tom Oh BTW, submitters will get one for free Edited December 6, 2006 by tlehnhaeuser Quote Link to comment Share on other sites More sharing options...
Guest Adrian Wick Posted December 8, 2006 Share Posted December 8, 2006 Hi Tom, below is a link to a few images we have rendered in Ironclad. www.jdidesign.com/files-in/ironcad-renderings.zip 19meg. Note: all images were rendered in Ironclad, the cropping and adding of background images was done in Corel Photo Paint and Drawer. Please not these images are for your review only. Should you want to publish any of them we will need to provide permission. Thank you, Adrian van Wijk Jdi design Ink +1(604) 632 9894 # 502-119 W. Pender St. · Vancouver · B.C. · Canada · V6B 1S5 Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted December 8, 2006 Author Share Posted December 8, 2006 Please not these images are for your review only. Should you want to publish any of them we will need to provide permission. 16458[/snapback] Hi Adrian thanks I will take a look. FYI - this is a public forum so anyone can get access to your files. I have downloaded already but you may want to delete it if you do not want anyone else to download. I cannot assume any responsiblity for these "leaking out". Thanks Tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.