MarWos Posted May 5, 2021 Share Posted May 5, 2021 I put the following assembly from the newly created directory ( file in attachment ). With DesignVariations, I created different length variants. When uploading from the directory, I choose Design_2 but the length does not change to 150. Please help Łączniki - zestaw 2.ics Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 5, 2021 Share Posted May 5, 2021 It's missing the external linked files in your upload. Quote Link to comment Share on other sites More sharing options...
MarWos Posted May 5, 2021 Author Share Posted May 5, 2021 What do you mean? Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 5, 2021 Share Posted May 5, 2021 Łączniki - zestaw 2.ics is missing the external link part that is the main part. It only has the bolts. You need to upload the external link in order for us to review the issue. Quote Link to comment Share on other sites More sharing options...
MarWos Posted May 5, 2021 Author Share Posted May 5, 2021 Is it ok? Łącznik 1.ics Wkręt Bez łba - M4,0 x 16,0.sat Wkręt Bez łba - M5,0 x 16,0.sat Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 5, 2021 Share Posted May 5, 2021 The issue is that you have the assembly parameter in the Design Variation but you don't have that driving the part or feature. If you set that in the parameter table (see below), then it will drive the part which is already set to drive the extrude feature. Quote Link to comment Share on other sites More sharing options...
MarWos Posted May 6, 2021 Author Share Posted May 6, 2021 I made movie and you can see that DesignVariations work only for part but don't work for assembly. Could you make movie and show how do this with assembly which i sent you before? Movie.avi Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 7, 2021 Share Posted May 7, 2021 2021-05-07-14-08-49.mp4 Here you go. Hope this helps. Quote Link to comment Share on other sites More sharing options...
MarWos Posted May 10, 2021 Author Share Posted May 10, 2021 But it doesn't work if you add it to Catalog1 and put Zespól2 to working area Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 10, 2021 Share Posted May 10, 2021 I see that as well. I'll have support file it. It must be something with the external part reference. Quote Link to comment Share on other sites More sharing options...
BSTAFF Posted May 10, 2021 Share Posted May 10, 2021 Filed under QA 71316 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.