tlehnhaeuser Posted September 23, 2019 Share Posted September 23, 2019 Is there a way to change how IronCAD-Mechanicals "Face to DXF" exports. In my case I need to rotate the Z axis 180 degrees. Tx T Quote Link to comment Share on other sites More sharing options...
SSIMMONS Posted September 24, 2019 Share Posted September 24, 2019 (edited) Good Afternoon, From what i can tell it seems to always come in at the orientation in which the part was first created (+z initial). If the part is rotated or moved it still does this from what i can tell. Front View Definition has seemingly no effect on this unfortunately. Edit: It keeps orientation based on most recent save. If you hit F7 and look at the part (in the desired orientation) and hit save and then export you should be in good shape. Hope this helps. -Spencer Edited September 24, 2019 by SSIMMONS Additional Information Quote Link to comment Share on other sites More sharing options...
mwalls558626 Posted September 29, 2019 Share Posted September 29, 2019 Tom, I have found that changing the anchor orientation will do the trick. I'll have to look again, but it seems like it pays attention to the Intellishape anchor, if I remember correctly. I had a time where I was doing this a lot, and it seems like I remember solving it by changing the orientation of the Intellishape anchor. I'll try find some time to refresh my memory. Mike Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted September 30, 2019 Author Share Posted September 30, 2019 Thanks all for the help. I appreciate it T Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.