MB-Furniture

Good morning Kevin, I found the problem. Since I don't know how to set the settings to default, I decided to just press buttons and see what happens. I had to press Enable/Disable Related under Linetype settings in the Linetype settings window. Thanks for the help, Martijn

Hello Kevin, I printed the document this again using these settings, and printing EXB to PDF, there was no change in result. All the lines are still solid. Did you also try it with loading both setting files I sent you? The Linetype Settings file can be loaded when you press Edit LType > Load Style at the bottom of the print window. Kind regards, Martijn

Good morning Kevin, Below I have added files of the Print Dialog window and the Linetype Settings window, you should be able to load these into your program. I've also opened a completely new and blank draft document and tried if in this file it was fixed, but no. I don't think it is file related, so it must be something with the print settings. If you need any more information, please feel free to ask. Thanks for helping me out, Martijn Print Dialog.psf Linetype Settings.plf Draft Document1.exb

[SOLVED] I had to press the Enable/Disable Related button under Linetype settings in the Linetype settings window. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- [ORIGINAL POST] Hello everyone, When printing a CAXA page to pdf or on the printer, all the lines become solid, There is no distinction between center, dashed and solid lines other than their colour. They all become solid. I read on a forum for AutoCAD that it had something to do with Line Types, could this be the same for IronCAD? Either way, I am unable to get it working again on my own. Do any of you have suggestions? I have attached a couple of screenshots of possible settings that might be wrong. Kind regards, Martijn

Hello Malcom, Thank you very much for the clear explanation and swift response. Have a wonderful day, Martijn

Hello, How do I get to the Linetype settings window? I have been looking for it for quite a while, but I am unable to find it. I did find a window also called Linetype settings, but this window is different from the one that you present in your post. Kind regards, Martijn

Hello everyone, After trying some things in the catalog browser I managed to lock myself out of it. I still open and use catalogs. But I can't right click, if I do I get the popup "Acces Denied". Anyone got a clue on how to fix this? I'd like to make my own group with ready made cabinets for a faster drawing time. Greetings, MB

Hello everyone, Recently I noticed this anoying bug. Sometimes blocks ghost, they get changed or deleted but still display their old shape. I have attatched a couple of screenshots. Has this been fixed in a new update? Im currently in version 22.0 Product update 1. Greetings, MB

Thank you for your reply, I believe I'm looking for the standards. I use ANSI.

Thank you for your reply, I don't use the center marks. The drawings I make are already filled with information, if I would add centermarks I thinks this will make the drawings to busy.

Hello everyone, What arrow type should I use on a dimension specifying the center of, for example, a hole. I currently use the Oblique "arrow". Is there maybe a sheet which shows when to use what arrow type? I have tried looking for one, but I can't find one. Greetings, MB

Hello Everyone, Intro I've been working with IronCAD for a few years now. And recently I came across an issue I have with the editing of part Sizeboxes in the SCENE environment. Issue When you click a block twice (or Alt+Click) it turns yellow, and six red handles appear. One of the handles is selected by default. Between the selected and opposite handle a blue arrow line with a measurement box appears. This measurement box is the problem. The measurement box covers up a big part of the block and or handles. This is very frustrating when needing to edit the thickness of thin parts. Also, when moving your mouse to click the measurement box to edit it, you can accidentally hover over an other handle which removes the measurement box and so does the ability to edit the measurement. Suggestion I suggest that the measurement box gets removed from the 3D environment, and gets moved to a static position in the properties tab on the left bar (I don't know the correct name). The entire "Edit Sizebox" menu could be moved there also. I would like to hear other people's experiences and opinions on this topic. Greetings, MB Screenshots

Hello Kevin, Currently I'm experiencing the same problem. I stupidly closed the catalog browser. I'm sadly unable to open it via the method you provide above. Is there any other way to open the Catalog browser? Greetings, Martijn

Thank you Malcom, I knew that when opening a file and chaging the dimensions style it would only save it for that document. But... I found settings elsewhere that were named "Standard". This made me think that these were settings that it then would use as the standard. Thanks for your suggestion about making a template. I will look into how to do it, and see if this helps. Greetings, Martijn

Hello everyone, Everytime I open a CAXA draft I change the dimension settings manually. I've looked into changing it permanently across the whole of IronCAD, but it seems like this is impossible. Today I wanted to change the general text style of normal text and dimensions, I found the font I was looking for and changed the "Standard" style. When opening a new CAXA draft it just uses the old font again. Could someone please explain how I can change settings in IronCAD, and it changes it for the entire program for the rest of existence? Greetings, Martijn