Daniel Catlin

Thanks for that. How do I create a local coord. sysytem?

Hi, Can I reset the orientaion of the screen. When I start a scene the x,y,z co-ordinates are back to front. I've always worked on the principle that x is left to right, y is front to back and z is up and down. It makes makes a difference when you place your elevations in a drawing because the orientaion is all wrong. I never had this problem with IC8 or IC7 Because I work with single parts rather than assemblies its becomes annoying after awhile have to keep turning things around with the tri-ball. Cheers Danny

Thanks Kevin I will let you know how it goes. It might be a while before I get back to you. Because of the 7 hour time difference I'm going home now. Thanks again Danny

Hi Kevin, I installed the hot fix and everything worked ok. I shut down that night and started again the next day. Used IC on an off during the day, no problems. Shut down last night, started again this morning I get the dreaded error. I dont think windows updated yesterday or today, I havent installed anything lately or changed configurations. I am running Symantec anti virus and security, Intel Pro Wireless There is a thing called Machine debug manager running in the background (don't know what this is) Being a Dell machine you get an awful lot of junk with it (I'm being polite here). I am thinking about doing a clean install of Windows XP but would rather not if I can help it. I am assuming that something has corrupted Ironcad.exe. I'm not sure what a runtime error. Any ideas would be appreciated Regards Danny

Hi Kevin, I installed the product update and it worked for a day or so. Now I'm getting the same error message when I try to start IC. Regards Danny

The hotfix seems to have worked Thanks Danny

Hi, I keep getting the following error when I try to start IC9.0. Runtime Error Program: C:\Program Files\IronCAD\9.0\bin\ironcad.exe This application has requested the runtime to terminate in an unusual way. Please contact the applications support team for more information. I had this when I first installed IC9.0 about six months ago and had to re-install it. I'm using a Dell XPS Intel 2 core cpu t7400 @ 2.16GHz 2GB of Ram, 143GB hard drive with 122GB Free space. NVIDIA Geforce Go 7950 GTX Graphics Card I have'nt Installed anything lately and virus check is ok. Regards Danny

Thanks Mike and Kevin I misunderstood what Kevin wrote. I tried it and it works great. cheers Danny

Thanks Kevin, How do I level off the base of the wall. My 1 day training session didnt cover surfaces, so I'm still learning. Regards Danny

Hi, I'm trying to draw a wall which is curved but also slopes down form right to left. I can draw the 3d guide curve but I keep getting a twist in the curved section. It starts off perpendicular to the base but ends up sloping inwards.(see attached). Also. How do I keep the base flat. Do I have to remove the overhang at the base or can I sweep the curve around two guide curves? Regards Danny Catlin roofs_heath_b.ics

I didnt know about CTRL-TAB, Thanks. Its one of those intermitent faults. If I restart IronCAD it will be ok. It mainly happens after I've used it for along time. Because I draw mainly roof build ups (tiles, battens, rafters, etc) and pull out the individual parts I end up with a lot of open windows. I used to get this on version 8 as well. Danny

Hi, I have got 4 scenes and 1 drawing open but only 1 scene and the drawing show up in the windows menu. Is there a reason for this. Its not to much of a problem but its a bit of a pain if I have to switch between windows. Danny

Thanks Kevin that was exactly what I was looking for Regards Danny

Hi Robert, The resolution is quite good on my machine but its the receiving end I think that has the problem. The problem is that if the same drawing is faxed several times the quality deteriorates. I generally try and use email as much as possible but not everyone has a computer on site. I find that if I change the font to something like Verdana it opens the numbers out so they are easier to read. In AutoCAD you can set your preferences up before you start drawing and use the same set of preferences time and again. I was wondering if you could do the same with IronCAD. If I could set the default font to Verdana I wouldn't have to go back over every drawing to change the font. Also, If I do an angular dimension, I cant change the precision by right clicking, clicking precision and changing the decimal place. I have to go through the properties menu. I'm just curious as to why I have to do it this way. It works ok with a straight dimension but not with angles. Regards Danny

Hi, Is it possible to set the default font on a 2d drawing to something other than Ariel. I find that Ariel doesn't fax to well. 0's, 9's, 3's, 8's and 6's all look the same. I just find it is time consuming having to go back over a drawing just to change the font. Regards Danny