djohannesen

Thanks for all the help. I will try sending it to support. I tried opening it on another machine with version 9 on it, but the program just shuts down with no messages or anything. David J

Hi all, Can anyone help advise how to recover a crashed drawing. I have a drawing, 33 pages, 11mb & it won't open in IronCAD. It failed while performing a save on the last drawing. When trying to reopen it, I just get error messages which when click OK/cancel just reappear. I need to reboot to start IronCAD again. I have another drawing, 22 pages, 20mb, no problems. In explorer I can right click the crashed drawing file & export to pdf to use the existing contents for printing. Unfortunately, I need to update a number of the sheets & with it crashing I can't do this. Any help would be greatly appreciated. IronCAD 8 PU2. Regards, David

Thanks Carey, The help file isn't real clear to me that's all. I will try to work out the procedure for that numbering fault. Davo

I have just upgraded to update 2 - never did update 1. 1/ In line type settings, the default settings are too numerous for our purposes. I want to reduce the number shown, & set the ones I want with my properties. Every time I try to delete a line type, I get a message it is in use. No views have been generated, & no scene files are open. How do I get to delete & modify the list??? 2/ If I generate a view, then highlight it & right click to select properties, style type is listed as Default Style. If I change a line type property, style type is now listed as Default Style*. What is the go with the *? 3/ Sometimes when editing line types, for some reason I get a 2nd line type name occuring with a number suffix. Ex: Use a line type called Standard & modify some of its properties, I then have Standard & Standard(1). Why is this? Happens a lot with V8.0. 4/ Is there a way to print a list of hot key settings? 5/ Can someone explain more clearly the settings for attched file? Regards, Davo

Thanks for your reply. It's odd - I kept working & any existing files opened & worked with OK. This file, no go. Shut down Ironcad, didn't reboot computer or anything, opened it again - all OK. Regards, Davo

I need to model a bund with a 1° slope on the floor. I created the bund, then created a 1° cone. Made the cone a negative, then subtracted it from the bund floor. Now, I can't smart dimension to the bund whether on the bund only, or, from another part to the bund. I can dimension other parts on themselves, or to other parts. When trying to dimension, faces etc. highlight, & a dimension is often started, but from what appears to be the scene centre point. Using V8.0. File attached for checking. Regards, Davo Bio_filterExt.ics

I know I have queried this before, but I can't remember the final outcome. (Have tried searching). On a number of occasions we have trouble deleting Ironcad files. We get "file in use" error etc. It appears to occur only with .icd files. Error attached. Any advice appreciated. Davo

Steel pipe & fiittings, (bends,elbows, reducers etc.) Davo

I have searched the forum for how to perform lofts from square to round profile. I still can't remove the twist which occurs & 'corrupts" the finished loft. Can anyone explain a bit more clearly how this is achieved? Thanks, Davo

Thanks guys. That solves the problem. Any advice on when it is recommended to use a certain kernal? (Apart from when something fails). Thanks, Davo

I have a scene where extruded parts are not able to be modified via handles. This includes standard catalog items like blocks etc. If a block is dragged into the scene, you can adjust it via handles when first dropped. Once deselected & reselected, you adjust the intellishape handles, the intellishape box changes, but the part doesn't. New scenes appear OK. I have rebooted computer with no change. Ferfer to attached file, parts 131 & 132. Regards, Davo 498_WilliCrane_Warehouse_1.ics

Can someone explain why when 2D sketching for extrude etc., if you select "hide edited part" then use project 3D, the part shows. This is frustrating for me as I normally need to reference other parts & the edited part blocks them. I know if doing "extrude - stand alone", you need to have parts showing, but why on "edit cross section" & "add material"? David

I would go for 60-70% customer driven. (I still feel a number of basic items need refining/including.) Also, with new innovation, would'nt that be best determined by Ironcad saying "we plan to do this..., what do our clients think?" Davo

We often get error messages to the efect advising us to perform a Save As on the working file. If we do this we find we can't delete either the original file, or the new one. This also occurs if a file is sent by email, some changes or notes made & returned via email. Try to replace the existing file & can't do. Error message to do with "file in use". Any ideas. Davo

I agree totally Tom. I often wish to swap between the 2 formats depending on what I am trying to do. I would also like an option to always have both handles available. (When you extrude etc., you then need to go into properties & tick the relevant size boxes to get choice of both handles.) Davo