ftiedemann Posted February 27, 2008 Share Posted February 27, 2008 (edited) Just installed the Hotfix 2 for Ironcad V10 and was wondering if anybody knows what's actually fixed? The annoying drawing browser pop out and "pushing" the drawing to the right has certainly not been fixed, and the browser does NOT remember its setting eg. auto-hide which is the most frustrating thing since quitting the smokes!!!! What the.....??????? Edited February 27, 2008 by ftiedemann Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted February 27, 2008 Share Posted February 27, 2008 Yes those options require a persistence change and registry change. We are planning for those option in the PU1 release. We will have that ability to store the browser open (and hopefully auto-hidden) by default to remove the pop-out. Sorry that it could not be added in the Hotfix. Cary Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted February 27, 2008 Share Posted February 27, 2008 Just installed the Hotfix 2 for Ironcad V10 and was wondering if anybody knows what's actually fixed?20812[/snapback] Bugs fixed with 10.0 Hotfix 2: Surface Fillet issues Hide and Unhide issues with Hoops mode that is causing highlight issues and parts to remain hidden Title Block properties update Error editing text size in the Properties dialog. Material BOM property is assigned to Custom Prop. regardless of toggle setting Parts not displaying their facets Can not delete assembly feature in Advanced OpenGL In Advanced OpenGL, click "Undo". The 2d profile will disappear a moment while you do zooming or panning Suppress part with smart dimension, but dimension does not go away Triball is disabled in Face level edit texture Practically impossible to select the 3D Curve in this case Thread Hole callouts are duplicating during Update All Views Add "Dimension Constraint" between a line and a rectangle, their position change Select "Smartconstraints" can not get the dimension in the technical drawing Can't see Mass Density value in "Edit Catalog Item" mode Sphere is not represented correctly in the Drawing when the part is ACIS Parametric setup breaks down when changing assembly sizebox values Catalogs are slowing down the startup of IronCAD due to a change in behavior on startup from V9 Cosmetic Threads are not shown in Section Views in V10 Drawing should do a fit sheet when each sheet is activated. Match Face Selection draws the Highlight way off the part Hidden line has issues in Advanced OpenGL Thread lines should stop at the end of the part COG Does not dispolay correctly in Advanced OpenGL Suppressed part is displayed in Advanced OpenGL Preview within Shell Command not working in Advanced OpenGL Save All as External Error Application error when insert w/o "Insert as link" Unlink (External) creating a "suppressed" copy of this assembly Incorrect ICAPI result from IZBSplineSurface::GetBSplineInfoCOM Problem to load external linked file because of clsid Crash in iSpline2D destructor Tab Key of Extend Curve does not work when the PB is open 2D Sketch created from a Local Coordinate system is getting an infinite plane Assembly loses Mirror orientation on trip thru Catalog. Texture and Color Blend together on Part Smartpaint in Advanced OpenGL Sketch Over/Under/Over Highlight Issue When Undo Redo TriBall plane handles don't all highlight File Close is not closing the IronCAD scene Mechanism Mode shouldn't detect collisions of suppressed parts. Catalog Read Only tab colors is not working in V10's catalogs Design Variations getting lost for some parts in a Catalog. Drag and drop an Attachment point to another, Advanced OpenGL problem 2D Sketch is distorting when edit the sketch mode Detail View for Architectural is not correct in Scaling SmartPaint Part Colors lost when Custom Hole Thread Texture is Applied 2D Sketch created from a Local Coordinate system is getting an infinite plane Zoom to Cursor Crashes IronCAD when over a toolbar or in another window Crop View Option in the Property Browser is always empty on a selected Crop View Missing hatch lines Hope this help shed some Like Bernd Quote Link to comment Share on other sites More sharing options...
ftiedemann Posted February 27, 2008 Author Share Posted February 27, 2008 Thanks guys! Good to know whats going on, especially with what is actually fixed and what not considering the problems at hand with V10. Suggest that any Hotfixes or PU's contains a text file or help doc with "what's new?" What the ability to store the browser open (and hopefully auto-hidden) by default to remove the pop-out concerns, this is really giving us the woopdeedooda's here and looking at the community site, a lot of people seems to think the same. Could you give us an estimate on when the PU1 will be available? We are still discussing here if we should revert back to V9 and stick with it since it worked reasonably well. Is there any way to get V9 to work with V10 files? Cheers. Quote Link to comment Share on other sites More sharing options...
IronKevin Posted February 28, 2008 Share Posted February 28, 2008 PU1 is scheduled for early Q2 v9 cannot open v10 files so the only way to go back is to export your assemblies to ACIS or Parasolid files and import them into v9. The downside to that is you lose feature history and drawings would have to be recreated. Quote Link to comment Share on other sites More sharing options...
fhunt Posted February 29, 2008 Share Posted February 29, 2008 Where did you get Hot Fix 2? Quote Link to comment Share on other sites More sharing options...
ftiedemann Posted February 29, 2008 Author Share Posted February 29, 2008 Where did you get Hot Fix 2? 20844[/snapback] Yeah, - exactly - how would you know that a hotfix is released or where to get it. I got the tip from the local reseller here in Australia ("good bloke" as they say here downunder) otherwise I would not have known that there was one released either. you can get it in the "subscriber downloads" area at: http://www.ironcad.com/support/community/index.php?act=idx Quote Link to comment Share on other sites More sharing options...
ftiedemann Posted February 29, 2008 Author Share Posted February 29, 2008 PU1 is scheduled for early Q2 v9 cannot open v10 files so the only way to go back is to export your assemblies to ACIS or Parasolid files and import them into v9. The downside to that is you lose feature history and drawings would have to be recreated. 20836[/snapback] Ok,- seems like we are stuck with V10 then, we have already 400+ models/drawings revised or saved in V10 and reverting them all would mean even more waste of time. Looking VERY much forward to the PU1, - hopefully everything will be sorted out by then - especially the MOST annoying drawing browser pop out NOT remember its setting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.