Marcus Bertilsson Posted January 10, 2007 Share Posted January 10, 2007 What does this meassage mean? Why is it popping up? How can I avoid it? It popped up in a scene file and we had to say OK maybe 50 times until it was gone. Quote Link to comment Share on other sites More sharing options...
David Thomas Posted January 10, 2007 Share Posted January 10, 2007 yep I've just had this problem this morning, only problem was that my model had about 2000 parts in it ,( very tedious) I think it is to do with the new centre of gravity tool , turn off this in Tools , Add in applications. My message did not reappear after doing this. Quote Link to comment Share on other sites More sharing options...
Jonas@Solidmakarna Posted January 10, 2007 Share Posted January 10, 2007 (edited) I've heard about this a couple of times also (but not seen it myself). The message pops up 15 times or 30 times when saving a scene and that is not only on the first save but every save after installing PU1. Only on one or two files though, not all files. Thanks for the tip about the CoG tool! I'll check if it works here as well. Edited January 10, 2007 by Jonas@Solidmakarna Quote Link to comment Share on other sites More sharing options...
David Thomas Posted January 10, 2007 Share Posted January 10, 2007 mmmm , I think I spoke to soon !!! , my meesage has come back !!! , but not all the time, it just seems to do it a few times and then dissapear..... Quote Link to comment Share on other sites More sharing options...
IronKevin Posted January 10, 2007 Share Posted January 10, 2007 This should a one time event per file, adding the new Mass Property data to each part. If you use external links, regenerate all the parts before saving to ensure they will all be updated and the message won't keep popping up. Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted January 10, 2007 Share Posted January 10, 2007 I get this too Quote Link to comment Share on other sites More sharing options...
Jonas@Solidmakarna Posted January 10, 2007 Share Posted January 10, 2007 Is it enough to regenerate the assembly? Or must each part be regenerated part by part? Because regenerating the parts in the assembly (selecting the assy) after the file has been saved once doesn't seem to help. Quote Link to comment Share on other sites More sharing options...
IronKevin Posted January 10, 2007 Share Posted January 10, 2007 Regenerating the assembly has been working for me here. Please send me you assembly if it keeps giving you the Mass Properties mesasge after regenerating and saving ( support@ironcad.com or ftp://ftp.ironcad.com/upload/ ). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.