Duee Posted February 11 Share Posted February 11 Hello. I would like to ask for help. I have been using icwoodlab for half a year. Pgcnc 2030atc machine and startech cn plus. Unfortunately, since the purchase nothing is ok. Be aware that the software is difficult. But it wasn't well established from the beginning. There was still a problem with marking the label, except for incorrect drilling. Otherwise they will apply for a plotter, it is also constantly disappearing, or their main incorrectly. I'm looking for someone who is competent enough to write me an appropriate post-processor entry that will be clear and readable in the event of various changes, or when something unusual is sent. Let me tell you, I'm exhausted and mentally exhausted. Software that generally makes it easier for me to use that we spend 15 hours a day at work. My family and financial life is already suffering. makes various furniture, kitchen, wardrobes, etc. mainly chipboard and MDF Unfortunately, I am writing through a translator, so please be understanding. Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted February 12 Share Posted February 12 Where are you located? We can get you in contact with a local reseller to assist with Woodlab CAM. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.