Guest Narendra Posted August 2, 2023 Share Posted August 2, 2023 I have made a barrel cam using wrap emboss and 2d curve. How do i give cam constraint to it so that it will move according to the profile? Quote Link to comment Share on other sites More sharing options...
SSIMMONS Posted August 2, 2023 Share Posted August 2, 2023 I believe you can use the mechanism mode found in the tools tab, but there are some limitations. Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted August 2, 2023 Share Posted August 2, 2023 You should be able to use the Follower/Cam Constraint in the Positioning Constraint tool. Follower/Cam. Creates a Tangent Constraint from a point or surface to the swept side surface of an extruded profile. Basically you can constrain say the side of a cylinder (pin) to the side of the CAM path that was made assuming it is smoothly connected. The movement would probably need to use the Mechanism mode as mentioned above. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.