Kaspars Posted May 9, 2022 Share Posted May 9, 2022 Hello, I am recently going from IronCAD 2016 to IronCAD 2022. I have problem with part modification after copy/paste. Copied part showing wrong after editing. When I trying with IronCAD 2016, everything is fine. I reinstall both versions. Same settings for both IronCAD. I have Dell i7, Windows 2010, RAM 32GB, NVidia GTX 1060 with latest drivers. Did you saw such something before? Quote Link to comment Share on other sites More sharing options...
SSIMMONS Posted May 9, 2022 Share Posted May 9, 2022 In short, I have seen it all hahaha. I see a new thing like this about twice a month since 2017. It will likely correct itself if you do a "recreate display" under the "tools" tab at the top. If that doesn't work can you post the file? Thanks. Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 9, 2022 Share Posted May 9, 2022 Does it regenerate after you click in the background? If so, check the tools/options/parts for the regeneration method. Make sure it is set to regenerate automatically. See Below. Quote Link to comment Share on other sites More sharing options...
Kaspars Posted May 10, 2022 Author Share Posted May 10, 2022 Thank you for help. I am trying recreate display and regeneration option is enable automatically. I reinstall one more time, reinstall also net frame 3.5, 4.8 and vc runtimes also. Everything without success for IronCAD 2022. IronCAD 2016 working well. Different actions for X, Y, Z - for Z regeneration work; for X and Y not work. Quote Link to comment Share on other sites More sharing options...
SSIMMONS Posted May 10, 2022 Share Posted May 10, 2022 5 hours ago, KKEKURS said: Thank you for help. I am trying recreate display and regeneration option is enable automatically. I reinstall one more time, reinstall also net frame 3.5, 4.8 and vc runtimes also. Everything without success for IronCAD 2022. IronCAD 2016 working well. Different actions for X, Y, Z - for Z regeneration work; for X and Y not work. Can you post the file here? It is just a block so I don't see any proprietary information or anything. -Spencer Quote Link to comment Share on other sites More sharing options...
Kaspars Posted May 10, 2022 Author Share Posted May 10, 2022 Same actions in ICD 2016 and ICD2022 - different results. This is just simple file of drop extrude from catalog, copy/paste and modifying second part. part copy paste test ICD2016.icspart copy paste test ICD2022.ics Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 10, 2022 Share Posted May 10, 2022 Can you show a video of your process? There is some variable being added to the Anchor of the second part (click the show formulas). Are you using the Shapes catalog or some shape you saved in the catalog? If you can record the steps, we can see possibly what is happening. Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 10, 2022 Share Posted May 10, 2022 Note: Both shapes in the 2022 file have the issue. I don't think it is something with the copy. Quote Link to comment Share on other sites More sharing options...
Kaspars Posted May 10, 2022 Author Share Posted May 10, 2022 I am using standard catalog. Capture_20220510195509.mp4 Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted May 10, 2022 Share Posted May 10, 2022 Very strange. We can't reproduce this here with our 2022 SP1 release. Did you install your version from the IronCAD.com download or from your local resellers site? Just want to make sure it is not a possibly localization or regional issue. Next, try running IronCAD as administrator. Right-click on the IronCAD.exe (or Shortcut for IronCAD) and select Run as Administrator. Perform the same steps and see if you get the same results. Do you get the same results if you use the Extrude from the Shapes catalog versus the Starter catalog? If that doesn't change, I would try to uninstall and reinstall 2022 SP1. Something is really incorrect with the way it is behaving. Please let us know. Quote Link to comment Share on other sites More sharing options...
Kaspars Posted May 10, 2022 Author Share Posted May 10, 2022 (edited) I found problem and solution - problem is Region and Decimal symbol. I am from Latvia and I use Decimal symbol "dot", because I have bookkeeper system as well. When I was change dot to "," - IronCAD2022 start working well. Interesting fact - for IronCAD2016 doesn't matter what decimal symbol I use. Edited May 10, 2022 by KKEKURS Quote Link to comment Share on other sites More sharing options...
IronKevin Posted May 11, 2022 Share Posted May 11, 2022 We see it too with those settings. Bug filed, QA # 73748 Quote Link to comment Share on other sites More sharing options...
Bill C Posted May 11, 2022 Share Posted May 11, 2022 The image above indicates that there is a discrepency between what is being drawn by our UI (e.g., the 150,000 in light blue) and what the edit control uses for decimal separator (e.g. 150.000 shown in the white edit control) What happens with the other parts of our UI in this case? What about our SizeBox property page? What about Property Browser? What about Parameter table? Quote Link to comment Share on other sites More sharing options...
Bill C Posted May 11, 2022 Share Posted May 11, 2022 Hello KKEKURS, Looking at your video, I noticed that sometimes the white edit control shows a comma decimal separator and sometimes it shows a period. Can you confirm that when the white edit control shows a comma decimal separator, the behavior is correct. And incorrect behavior when showing a period? Also, is your OS a Latvian OS? or is it English OS with Latvian Regional settings (minus the change you made to decimal separator)? Quote Link to comment Share on other sites More sharing options...
Kaspars Posted May 14, 2022 Author Share Posted May 14, 2022 Hello, Bill C! I use Windows 10 Pro with English Display Language and English Language for non-Unicode programs. I set Latvia is for region and Latvian is format's for numbers, currency, date and time. When I found solution, I did not "dig deeper" I think - this Decimal symbol problem link also with Welcome dialog page position. Welcome dialog page sometimes going to 0,0 position - randomly. After I change Decimal symbol to dot - it is always in center. Quote Link to comment Share on other sites More sharing options...
IronKevin Posted May 23, 2022 Share Posted May 23, 2022 This issue should be fixed in the upcoming 2022PU1. Quote Link to comment Share on other sites More sharing options...
IronKevin Posted November 30, 2023 Share Posted November 30, 2023 This issue should be fixed in the next release. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.