YEO
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Downloads
Articles
Gallery
Everything posted by YEO
-
If you pattern with Triball, the hole falls off the surface
YEO posted a topic in General Discussion
hellow If you pattern with Triball, the hole falls off the surface. I want to know if this is intended or a bug. Or can I switch to another setting? I'd appreciate it if you could tell me aa.avi -
There's something wrong with this. The case of checking "SHOW THREAD RUNOUT" and the case of not checking are attached as VIDEO. ROUNOUT and MALE SCREW cannot be marked together. Please let me know how to solve this test.avi
-
1. PATTERN the TAP. 2. MIRROR PATTERN 3. When called from CAXA to STANDARD VIEW, THREAD of MIRRORED TAP is not marked. test.avi
-
I solved it. It was resolved by unchecking the "show thread runout" in the attached image. I think the setting method has changed while solving the problem of "show thread runout." Is that right?
-
I'm using 2023 PU1. Is it a bug in a cosmetic thread? test.avi
-
Has this issue been resolved in PU1? It's not updated yet.
-
Can I change the arrow of geometric tolerance to a triangle?
YEO replied to YEO's topic in General Discussion
I solved it I was referring to the guide line shape.- 1 reply
-
- 1
-
-
I want to change the arrow of geometric tolerance to a triangle in the caxadraft. Where can I resize the arrow if I can't change it?
-
I think ironcad is a very good program and I will continue to use it. So I hope it will continue to develop in a good way. The ironcad has many small bugs. I think this part can be improved and I want to share information. But what I think is most important is that the ironcad is not stable. I think it lacks optimization? stability? than soldworks.
-
Do you know this bug? The blanks won't fill up The function works, but it doesn't fill in the blanks NewICScreenRecord.avi
-
Which nvidia graphic dirver do you recommend? GAME READY DRIVER vs STUDIO DRIVER
-
I understand why. When constraining, a pop-up message appears when you left-click inside the second selected part to approve. However, if you accept the constraint by left-clicking in the background, you will not get a pop-up message. This was not the case in the 2022 version. I think it's probably a bug. NewICScreenRecord.avi
-
Attached is the option setting. option.ucx
-
Recorded VIDEO NewICScreenRecord.avi
-
test.ics
-
translates to "one element or less"
-
Less than one element? What's this?
-
Hi, Cary I really appreciate your help.
-
If it's an IC Mech problem, can't ironpro be improved? I've gotten too used to this.
-
1. HOLE and TAP are not recognized as THRU. 2. I switched to THRU after double-clicking, but the drill depth of the TAP continues to hold.
-
THRU holes are problematic if you input dimensions from CAXA DRAFT. Only COUTER BORE is properly recognized as THRU, and HOLE and TAP are inputted as depth. Of course, I applied the display mode of THRU HOLE as an option. Was it intended? Bug? This can lead to major problems if the designer does not notice. If you pay attention to this, you will get tired. thru.avi
-
Thank you for your help!
-
Are you aware of this problem? NewICScreenRecord (1).aviNew ICS Creen Record (1) aviNew ICS Creen Record (1) avi 새로운 ICS Creen Record (1) avi
-
I would appreciate it if you could tell me how to draw knurling comfortably in IRONCAD 3D.
-
Wow... That's weird. After changing to a different setting of SMART DIMENSION and returning to BASE LINE, suddenly the hidden line is selected well. I think there's something wrong.I don't know. For now, it's been resolved, so I'll keep using it. It must have been hard to understand because I am not good at English, but thank you for helping me. Thank you so much Malcolm.
