WAENGENEND

Hi Harley, I assume, but I'm not sure, that Ironcad looks how it was installed, selection Metric / English. My installation was Metric and my Fasteners are standard on Metric.

What I did is import it, extract surface, and thicken the surface, then you have a part, it worked fine and rather fast. Part3.ics

What kind of math formulas can we use? Because normally I would do Total Mass = Cell x Cell, so where is the PRODUCT standing for? All the best Willem

Smartdimension and use the shift key to select both ends For tolerance right click on dimension and use go to Tolerance

I would like to make a remark to the resize. I asked this already a long time ago, why can we not rezise by pulling the red corner blocks? I think this was solved in CAXA. so it will resize all the text and lines in on command!

Ok thx that worked

Is this a bug? or we do something wrong? Thx in advance, Willem

Please Sir.............. Part1.ics Part1.icd

See video, I want to measure two point, but what I do, it goes wrong, this happened after the last update. Does anyone has this problem, or a workaround? Thx in advance, Willem 20220809_145740.mp4

Use the shift key and select the outside or inside drawing 20220719_122112.mp4

Problem solved after a very long search. Problem was generated due to a user account when loading the network profile. Deleted the user account and generated a new one, all worked again.

I deleted all XML Files same result

Since last monday or computers with Ironacd have problems when projecting a surface on a sketch. have a look at the movie, what is happening or what are we doing wrong??? Movie.mp4 Part.stp

I thought something like this, but I cannot get the loft to work. Asks about matchpoint and intersection Hook.ics

In my formula I have a parameter 1000 and 100, if I devide these i get a result 0.01, what is going wrong

Hello Cary, it seems that the Dutch Support has received today the hotfix for thsi problem. So we will receive it tomorrow. All the best Willem

Hello Cary, That's what I wanted to now, do you now if the DXF import problem is fixed with this hotfix? All the best Willem

Does anyone have an idea when the new Service Pack or Fix will come for IC2022 All the best Willem

Thx Kevin

Yes that's what I mean and since we are not working with CAXA and only ICD, I hope a fix will be there quick since this is very irritating. We use this import DXF daily.

We have a problem when importing DXF Files. basically all DXF Files. Other programs give the right result, Ironcad not. Who can help me61867_Abdeckaufkleber BM085.dxf 20220202_095749.mp4

Thx Kevin, I wil try these options.

Who can help me, When using IC after the hotfix update, my section view in a ICD doesn't work any more. When I try it as a administartor it works but when I go back to the normal login it doesn't work anymore. Anyone else has this problem.

Hello All, Who can help me with a question. We make a lot of parts bending wire, with a semi automatic NC machine. Attached is a V-Shaped wire. For us it would be nice to get the cut length of the wire we need, now I do it like this Code Generator Variable -> Cutlength Get From -> Sweep path or Extrusion Section In the description is shows the cut length, but only when the sweep is done from the middle of the diameter. Is there a faster way maybe "drag and drop" to get this measurement? All the best and stay safe and healthy Part1.ics