maurizio@fronema

Hi Kev, I have installed it using IronCAD2023PU1SP2Patch_DLM.exe. I get it from this URL: https://www.ironcad.com/product-update/2023pu1sp2/ Thanks M

Hi Kev, it happens also on my PC. Here is the original version of the DLL: Thanks M

Hi Sam, please retry the download. The file is on the WEB. M

Good Morning, if you are using the Face to DXF ICMech tool, install this latest delivered version: www.ironcad.it/download/ICMechanical/ICMechanical_25.11.08_X64.exe Furthermore, dropping the tool with Right button mouse, you will have the settings about this tool: (These are the same settings in IPROSettings.exe) Please control if the red boxed option is set. When this option is uncheked, the threated holes are not exported to DXF. I hope this can help you M

Hi Spencer, no, I haven't. M

Hi Wllem, here all is working fine. Please try installing this setup: www.ironcad.it/download/ICMechanical/ICMechanical_25.11.08_X64.exe Let me know. M

Good morning, please upload your file, so we can verify it. Thanks M

Hi Sam, these HWDrill are Hollow IShapes. Every HWDrill must to be a solid IShape, because it is used to find interference with other parts. You can use the SolidToHole tool in ICM Utily to convert these IShapes in solid. I hope this make sense to you M

Hi Sam, that's very strange. Please download this file: www.ironcad.it/download/Kevin/IPROExportFaceSection.zip Extract the DLLs, and replace them in ..\Bin folder of ICMech. Let me know. M

Hi Sam, the ExportFace cannot export AssemblyFeatures. These features are not the "real cuts" in the part. Anyway I have noted a strange behavior. In fact, your IPRDrill feature become suppressed when you drop the tool. If the feature is suppressed, it cannot be exported. Looking at the video, you can see that when I drop the ExportFace tool, the holes stay visible. So I'm wondering way this is happening on your system.... I'm using here the same version of the software that you are using. Let me know if you have more details. I hope this make sense to you M ExportFace.mp4

Hi Sam, could you upload the model file ? Thanks M

Hi Harley, further to the Kevin suggestion, here is another way to do that, using IC-Mech Have a nice day M SetInBOM.mp4

Hi tgjang I have improved the IPROQuickTrim. This enhancement will be available in the next update: QTrimNew.mp4

This situation happens if you are saving a Catalog in the Program folder. Program folder is a system folder and it's not possible for any programs to have write permission on it. This is valid for Win10 and Win11. I hope this could help you. M

Hi tgjang, the name proposed for the export is the same name reported on the Tab related to the BOM. This name is composed by the name of the element selected for the BOM (in this case the full scene name "For_Copying.ics") and the name of the BOMConfiguration choosen for the BOM (in this case Default). That is the rule used to create the name proposed for the save. I hope this make sense to you M

Furthermore, in IPROActiveManager is possible to create a BOM, or to do search, based on the Status setting, And in ICM_Tools there are tools that can Ghost, Isolate or Suppress elements based on the Status setting.

Hi Bernd, this option is avaiable in IC-Mechanical: Using it you can also select and manage all the required items. I hope this halp you M

Hi tgjang, the observation of Cary is correct. Anyway, we have added a toggle that allow you to change the attachment mode in a fast way. Here is the video about this new function. NTrimSteels.mp4 This new behavior will be available in the next setup Regards M

Hi Bertrand, here is the correct file. These files are ASCII files, so you can edit them using Notepad or Notepad++. This file has to be copied in the folder ..\Norme\Holes\ I hope this make sense to you M Diameters.dat

Hi Betrand, thanks for the report. Using the application IPROLibraryDataMgr.exe, you can set/edit the required values for tollerances: Have a nice day M

Hi Bertrand, many thanks for the report. This bad behavior will be fixed in the next update V24.xx.xx update. Have a nice day M

Hi Harley, nice to hear you. Here are some informations: 1) In your Public folder there is a folder that you can delete. The name is "IronCAD Mechanica". This is a wrong name and it's not used by the application. 2) About the Export Unfolded Part tool, here are the templates used by the application: ExportFaceDimStyle.ini This file contains some DXF variables that you can set. As example, it's possible to change the DecimalPlace, the TextHeight, the TextAlignement and other variables related to DXF. This file is used whe you export directly the parts to the DXF. UnfoldDimStyle.ini This file is similar to the previous and it's used when you export the parts using an icd file UnfoldTemplateEmpty.icd Is the template used to export unfolded parts using the icd file DXFTemplate.dxf Is used by the IPROExportCoordinates tool. This is a standard DXF file that can be modified for the customer purposed. We use it when the coordinates get from the model are to be exported in DXF. I hope this make sense to you Have a nice day M

Hi Lee Meng Che, I have tried here using the latest development version, and all seams to work fine. So with the next setup every strange behavior about these functionalities will be fixed. Anyway, here are some clarification about "Get from Parent" and "Set to Children" options: 1) "Get to Parent" If you select this option the value of the current CustomData is get from the assembly parent, and set in the CustomData value. 2) "Set to Children" This option make sense when you are setting a CustomData in an Assembly. When you select this option, the current selected value will be set in all the children elements having a CustomData with the current selected title. These options only copy the CustomData values. The copied values don't stay "linked" to the original selected value. I hope this make sense to you M

Hi ATurner, here are the answer about your questions: 1) The Settings save only informations about the fasteners. Informations about holes are not saved inside the Settings file. 2) The information about holes are stored in the generical LastUsedValues and are get every time you start the tool. In the FastenerAssembly there is a bug and these values are not get correctly (it's get only the first hole). We are working to fix this. In the Fastener tool, this is working fine. 3) At the moment it's not possible to manage a "Customer" folders for fasteners. This is only possible for Steels. We try to implement this in future versions. I hope this make sense to you. Have a nice day M

Hi Spencer, using IC_Mechanical, you can place directly a Part, an HShape, an IShape or a Profile. This video is self explaining.. Have a nice day M Text3D.mp4