bmodi Posted August 29, 2014 Share Posted August 29, 2014 Attached part in not made in IC thou’ and trying to make similar part in IC. Is there a way to create indentation on sheet metal part created in IC? These indentations are used to insert the tabs of other sheet metal part in the rectangle hole and then bend the tabs to secure. Thanks for any suggestion/idea, in advance. Bimal BOTTOM_COVER_FHSAC1UNV40C.ics Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted August 29, 2014 Share Posted August 29, 2014 Yes it is possible using the Custom Form Tool. I'll try to have someone here create a sample how to do it. Cary Quote Link to comment Share on other sites More sharing options...
jolizon590016 Posted August 29, 2014 Share Posted August 29, 2014 (edited) You can also make any custom shape "punch" you like as a solid part, place it on the cylinder where it needs to be, and then use the "Cut Sheet Metal Part" command to make a hole in the part that is the same shape as the solid punch shape you made. You do this by: 1) Selecting the cylinder at the Part Level (blue outline) 2) Hold the Shift key down and then Left Mouse Button pick the custom punch shape 3) Hit the "Cut Sheet Metal Part" command, and the cylinder will now have the custom punch shape removed from it. You'll have to hide or suppress the shape to see it, but the cut will be there. I can't imagine a more precise way to put the shape you want on a cylinder, and then get a good flat pattern. That being said, it would be real nice to be able to put cuts, or bend lines, into a flat piece, and then fold or roll it up after. Mike 38509[/snapback] I think this from Mike at a different discussions will give the flow to work with but you have to create that dent profile/shape and set its operation not as hole but as a dent punch when you drop it to the sheetmtl catalog to function the way you like it. I can't exactly recall but to make it less complex but you have to tinker is to edit one of the sheetmtl catalog object's shape (dimple or the bead as you want it as a half slot like indents) that is almost close to what you want, save it with a new name and drop it back to the sheet mtl catalog as your custom dent. I wish I have saved that. joseph Edited August 29, 2014 by jolizon590016 Quote Link to comment Share on other sites More sharing options...
bmodi Posted August 29, 2014 Author Share Posted August 29, 2014 Thanks Carry, Looking forward to see the sample created and how to. Kevin did gotomeeting and we tried but could not. Thanks Joseph, I tried different methods but so far no luck. Quote Link to comment Share on other sites More sharing options...
jolizon590016 Posted August 31, 2014 Share Posted August 31, 2014 Here is the custom form I think you need. I hope I got it right this time. Rotate the model to view. regards Custom_Form_Shapes.pdf custom_form.ics Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.