IronKevin Posted April 17, 2009 Share Posted April 17, 2009 Hello all, We are investigating misc. problems on high resolution displays (higher then 1600 x 1200). If anyone has such a display and could provide the following information, that would be very helpful. - Screen resolution - Monitor brand and model - List of any graphic related problem you are having Thanks Quote Link to comment Share on other sites More sharing options...
cborer Posted April 17, 2009 Share Posted April 17, 2009 (edited) I use 1920 x 1200 2 Monitors HP LP 2465 Sometimes Grafic card is very slow. Sometimes edge is not shown (green line) Grafic Card: Nivida Quadro FX 1500 Driver: 20.7.07 Version 6.14.11.6252 Best Carlo Edited April 17, 2009 by cborer Quote Link to comment Share on other sites More sharing options...
tlehnhaeuser Posted April 17, 2009 Share Posted April 17, 2009 Carlo, do the little yellow "X"' tick marks appear when you try to "auto-project edge" in a sketch? Tom Quote Link to comment Share on other sites More sharing options...
Mike Allen Posted April 17, 2009 Share Posted April 17, 2009 We use 1680 x 1050 resolution (single monitor), Quadro FX 1500 - 256 MB (driver version 7.15.11.8120), Dell Optiplex 755, 8 GB RAM, Windows Vista 64-bit. We tried a more recent version of the Quadro FX driver, but noticed a definite delay when selecting objects in the scene (especially when using box select) - so we rolled back to the previous driver version. Quote Link to comment Share on other sites More sharing options...
Guest rzito Posted April 18, 2009 Share Posted April 18, 2009 Hi Kevin, You already know the problems I've been having on my system with IC vista 64. I get the same thing on my laptop vista 32. Details ASUS m505a 15.4" WSXGA+ 1680X1050 ATI MOBILITY RADEON HD 3650 1.0G DRIVER 7.01.01.730 MS VISTA ULTIMATE 6.0.6001 SERVICE PACK 1 4.0G RAM regards Quote Link to comment Share on other sites More sharing options...
cborer Posted April 18, 2009 Share Posted April 18, 2009 Tom I don't know I'll take care and let you know! Why? Carlo Quote Link to comment Share on other sites More sharing options...
Guest damann Posted April 19, 2009 Share Posted April 19, 2009 (edited) test Edited April 19, 2009 by damann Quote Link to comment Share on other sites More sharing options...
Guest damann Posted April 19, 2009 Share Posted April 19, 2009 (edited) Hello Kevin, I have big problems with IRONCAD V11. I have change the Graphiccard, but not is better. For the reasons I can not work in version 11. In the mode, Advanced/Direct3D i canot click and edit 2D Shapes. I can not edit 3D Curves, i can not make surfaces on 3D Curves. It often happens that an image is shown in Fig. That is to say, then I see a small excerpt from the scene you can rotate and zoom. When I click on Open GL switch, this error is not there anymore. However, it is then very large assemblies and slow corners. In the version 10 everything works perfectly. Please do not change functional features in new versions. I can not imagine that this problem only I have. Best Regards and sorry for my bad english amdi PC: Intel® Core2 Quad CPU Q9550 @3.4 GHz 8GB RAM Windows 32 Bit Windows 64 Bit Monitor: DELL 3007WFP-HC Color Monitor 2560 x 1600 Pixel NVIDIA Chiptyp: Quadro FX 4500 DAC-Typ: Integratet RAMDAC Speicher: 512 MB Zeichenfolge: Quadro FX 4500 Biosinfo: Version 5.70.02.17.A5 Edited April 19, 2009 by damann Quote Link to comment Share on other sites More sharing options...
Guest rzito Posted April 19, 2009 Share Posted April 19, 2009 Kevin, I noticed that while editing, if I lose the feed back from the command I'm using say trim or line etc if I Esc out of the command and zoom out then restart the command I get functionality back, sometimes it may take a few attempts until I zoom back far enough. I can then use the scroll button to zoom in to where I was originally and edit as normal, until you select a different command then it may fail again... and usually does! Regards Quote Link to comment Share on other sites More sharing options...
Guest EricFoy Posted April 21, 2009 Share Posted April 21, 2009 I'm just getting going on my new system (I've had it for nearly a year, waiting for IC for VISTA...). I've got Vista64 up and running, IC11 loaded. Now we'll see... Core 2 Duo E6750 4GB RAM NVIDIA GeForce 8500 GT HP LP3065c Monitor 2560 x 1600 I'll keep you posted... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.