Maria Ortiz Posted April 23, 2007 Share Posted April 23, 2007 Hello friends.... My name is Alfredo and work with Mary at Icad Peru SAC, We're from Peru. I use IC around a year and need your help. We have a friend that he want build a piece using IronCAD, he used solidedge and achieved to imported it. but in IC, he can't. Any suggest? thanks. Suspension_2.ics Quote Link to comment Share on other sites More sharing options...
cborer Posted April 23, 2007 Share Posted April 23, 2007 (edited) Hi Why don't you use a simple sweep or a extrude shape (each for every part of the profile) ..and then later boolean away the material you dont need. Yes we still miss a sweep with a start and end sketch. Good Luck Carlo Edited April 24, 2007 by cborer Quote Link to comment Share on other sites More sharing options...
IronKevin Posted April 23, 2007 Share Posted April 23, 2007 This part actually can be created all with Extrude. See the red part in this file. Suspension_3.ics Quote Link to comment Share on other sites More sharing options...
Maria Ortiz Posted April 23, 2007 Author Share Posted April 23, 2007 Ok thanks at all. But I prefer have a direct tool, rather than many steps. I hope that will be better, maybe in release 10. I love IronCAD and bother me , when I find some things that I can't do it. Best regards from Lima Peru... Quote Link to comment Share on other sites More sharing options...
Maria Ortiz Posted April 23, 2007 Author Share Posted April 23, 2007 Only one thing.... The seccion is basicly this... Not that but I get the idea ............. cheers Quote Link to comment Share on other sites More sharing options...
Maria Ortiz Posted April 29, 2007 Author Share Posted April 29, 2007 Excuseme Carlo. Could it be considered like an ER... I believe that we need with the next release (V10) or some hotfix... Thanks a Lot.... Alfredo Arcela Jefe Area Tecnica ICAD PERU SAC Quote Link to comment Share on other sites More sharing options...
cborer Posted April 29, 2007 Share Posted April 29, 2007 Hi Alfredo I asked for a "Sweep with start & end sketch" about 5 years ago! Things seems to need some time! Carlo Quote Link to comment Share on other sites More sharing options...
Maria Ortiz Posted April 29, 2007 Author Share Posted April 29, 2007 My God!!!! I cant't belive it ... Uhmmmm I hope that it starts soon. Thanks Carlo, maybe I could study my own solution.... Quote Link to comment Share on other sites More sharing options...
Mike Twining Posted April 30, 2007 Share Posted April 30, 2007 I asked for a "Sweep with start & end sketch" about 5 years ago! 17377[/snapback] A.K.A. the ability for a loft to utilize a 3D guide curve for a "Profile locator curve"? X2 on that one! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.