tcooksey Posted April 11, 2019 Share Posted April 11, 2019 Is anyone having trouble moving or rotating entities in a 2D sketch? I am finding that if you try to move or rotate entities, you see the preview of the move, but it just reverts back to its original position when the command is finished. These functions do work if you copy instead of move. This issue showed up after the latest patch. Troy Quote Link to comment Share on other sites More sharing options...
IronKevin Posted April 11, 2019 Share Posted April 11, 2019 It has been reported and I have requested a hotfix. Quote Link to comment Share on other sites More sharing options...
Cary OConnor Posted April 11, 2019 Share Posted April 11, 2019 If you don't select the curves first before entering the command, it seems to work ok. As Kevin stated, it is filed and we are looking into it. Cary Quote Link to comment Share on other sites More sharing options...
tcooksey Posted April 17, 2019 Author Share Posted April 17, 2019 It has been reported and I have requested a hotfix. 49489[/snapback] Do you have an ETA on this? Quote Link to comment Share on other sites More sharing options...
IronKevin Posted April 17, 2019 Share Posted April 17, 2019 Here is the hotfix for this. first, make sure you have 2019 PU1 installed, Then unzip and copy the attached DLLs into C:\Program Files\IronCAD\2019\bin bin.64.zip Quote Link to comment Share on other sites More sharing options...
tcooksey Posted April 17, 2019 Author Share Posted April 17, 2019 Here is the hotfix for this. first, make sure you have 2019 PU1 installed, Then unzip and copy the attached DLLs into C:\Program Files\IronCAD\2019\bin 49565[/snapback] My virus protection software (Norton's) is automatically detecting the dlls as threats and removing them. Never seen this before on downloaded hot fixes. I can't seem to disable this through settings. Do I need to disable Norton's to be able to extract this? Quote Link to comment Share on other sites More sharing options...
IronKevin Posted April 17, 2019 Share Posted April 17, 2019 We do not use Norton here so I'm not exactly sure how to advise you to proceed but i scanned the zip with our tool and found no threats. Quote Link to comment Share on other sites More sharing options...
tcooksey Posted April 17, 2019 Author Share Posted April 17, 2019 We do not use Norton here so I'm not exactly sure how to advise you to proceed but i scanned the zip with our tool and found no threats. 49575[/snapback] Okay, I will see if I can figure it out. I have seen it do that with some other files, but never with that kind of file from you guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.