Robert Andersson Posted April 2, 2002 Share Posted April 2, 2002 If you are working in a crossection and that crossection is not yet ready for "Finish shape", and you want to finish the work later for some reason, you can do that. Normally you end up with "Crossection is empty or contains outlines that overlap or are not closed" If you select "Create default shape" button instead, IronCAD creates a block no matter if the crossection is ready for extrusion or not. Using this method you can save the file and turn of the PC to continue with the sketch later. The sketch still contains your new oulines. This could help especially when working with large complex sketches. Robert Andersson Quote Link to comment Share on other sites More sharing options...
Rick Dorrington Posted April 2, 2002 Share Posted April 2, 2002 This is a great tip. Thank you. Very useful. Quote Link to comment Share on other sites More sharing options...
cborer Posted April 3, 2002 Share Posted April 3, 2002 Nice tip! I never looked on it from that point of view! Carlo Quote Link to comment Share on other sites More sharing options...
gbird Posted April 10, 2002 Share Posted April 10, 2002 Thanks. A very usefull tip Geoffrey Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.