tcooksey
-
Posts
169 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Downloads
Articles
Gallery
Posts posted by tcooksey
-
-
After installing the latest update, I have lost the ability to show hidden lines in the shaded mode.
Actually they have shown up a few times, but I can't figure out the when this happens.
They do show up in wireframe mode.
-
Kevin & Jonas,
Thanks for the info.
I had split another assembly out of the original troublesome file and it is having the same issue.
I will try your trick and see if that works.
Fortunately I had no external links in the files.
-
Well that's rather cryptic!
Care to share with us mortals?
Thanks.
It does appear to be fixed as it loaded up in seconds.
-
Kevin,
I have emailed a link to the file, to Iron Cad Support.
Troy
-
What would cause a 92Mb .ics file to take over an hour to open?
And is very sluggish once it opens.
I had a file that started acting sluggish, not terrible but noticeable.
It was a little over 300 Mb, certainly not the largest file I have had.
I cleaned a bunch of junk out of the file and split it up into 2 files (as there were two major assemblies in the file).
Each ended up being around 100Mb, but were still slow to open.
I thought my old RAID server might be going bad so I moved the files to my computer's hard drive with no improvement.
I updated all of the parts in one of the files and tried it again, no change.
The file does not appear to be taxing the CPU, only about 35%.
I tried opening a similar sized file and it took less than 15 sec to open.
This file had quite a bit of imported data from digital sculps that had been converted to nurbs solids compared to the slow file which was mostly IC generated.
Power Spec <1 yr old
i7-13700KF 3.40 GHz
32 Gb RAM
NVIDIA GeForce RTX 4070 12Gb GDDR6X
Windows 11 Pro
- 1
-
Sorry, I totally forgot about this request. I see that it works for you in your video. I just tried to use one of the standard Iron Cad scene templates and it exhibited the same behavior. It freezes the program. Very strange.
-
In the original version of 2024 and the latest update, using a previously created 3D Scene template locks up the program. I have opened the old file (last updated in 2023 version) in 2024 and did an update, then saved it as a template file. When I start a new scene and select that template, the program hangs and the template does not open. I have attached the offending file.
Thanks for any suggestions,
Troy
-
-
My virus protection software (Norton's) is automatically detecting the dlls as threats and removing them.
Never seen this before on downloaded hot fixes.
I can't seem to disable this through settings.
Do I need to disable Norton's to be able to extract this?
-
Hi Troy,
Is this in a particular file or using a particular operation? If you can send a file or video that might show this, it would help. I believe I have seen this happen after some command interactions in the past versions and we try to address those as they come up. Usually there is an update missing in the process.
Cary
Sorry for the delay in response.
I have had a hard time figuring out when/why this occurs.
It seems to show up during/after you have edited a 2D profile, but it is not an edge that is necessarily related to the profile you are editing.
Just an edge in the background, then after you finish, a different edge is highlighted.
-
-
Another odd thing that has shown up since the update last week is that a few random edges will show a green highlight like you selected them.
You can get rid of them by recreating the display, but they soon reappear and you have to recreate display over and over.
Troy
-
-
Is anyone having trouble moving or rotating entities in a 2D sketch?
I am finding that if you try to move or rotate entities, you see the preview of the move, but it just reverts back to its original position when the command is finished.
These functions do work if you copy instead of move.
This issue showed up after the latest patch.
Troy
-
Cary,
Sure enough, that works.
Obviously in the past, the order did not matter and my muscle memory was having me do it in the order that I was used to.
Thanks, but I would like to put in an enhancement request to be able to do it in either order.
I know this must seem petty, but there have been a lot of strides to streamline the workflow by reducing button clicks and what not, but loss of basic functionality that you have been used to for 20 years seems like it would certainly be a backward step.
Troy
-
-
I am putting a list of the top 10 most useful tools for design in IronCAD. I have my list, but interested in learning of everyone's list. I looking for the tools that you use on a daily basis. I know the TriBall is #1, but i'm sure everyone has their own.
I welcome your top 10 lists.
Tx
Tom
ps: feel free to email me if you prefer.
Okay, had to think about top 10.
1) Intelligent booleans
2) Triball
3) Keyshot integration
4) Thread
5) Scale body
6) Intellishape beveling / surface reshaping
7) Fastener tool
8) Helix tool
9) Mate and align positioning tool
10) Catalog drag and drop
- 1
-
I am putting a list of the top 10 most useful tools for design in IronCAD. I have my list, but interested in learning of everyone's list. I looking for the tools that you use on a daily basis. I know the TriBall is #1, but i'm sure everyone has their own.
I welcome your top 10 lists.
Tx
Tom
ps: feel free to email me if you prefer.
Being able to boolean parts and maintain the intellishape features was a real game changer for me.
This increased my capabilities by a tremendous amount.
I am a bit partial to this as it was one of my enhancement requests.
I am still waiting for being able to edit these booleans in a separate window like you can for catalog items.
This would be helpful when features within it fail.
It would also be really cool if the boolean had some features that could be associated with it, like blending intersecting edges.
-
-
-
RJ
A good suggestion, but no change.
In V2018, I could not work in Open GL2 and had never had an issue with that in V2017 on the same computer, so I thought you might have a point.
Tried all different combinations of settings and no change.
The odd thing is that the snap works fine when you are editing a 2D profile or when you are dropping an intellishape on a part, just not when you are moving with the Triball.
Maybe a Triball problem?
Thanks,
Troy
-
-
Okay I feel dumb asking this question after using Iron Cad for 20 years.
I finally just installed V2019.
I can't get the snap to work (SHIFT key ) in the 3D scence when moving an intellishape.
Am I missing something?
-
Hidden Lines?
in General Discussion
Posted
Hi Cary,
Attached is a screen cap showing the shaded hidden line mode activated from the toolbar and the hidden lines not showing.
This is typically how I activate display modes.
This is happening in all files.
Troy