jolizon590016
-
Posts
1,662 -
Joined
Content Type
Profiles
Forums
Blogs
Downloads
Articles
Gallery
Posts posted by jolizon590016
-
-
-
Hi Cary,
I'll try this with my home pc. It is also struggling to generate the COG. Odd.
-
Thanks Cary. I will give it a shot. -
Hi,
I updated to the latest update and it seems that models created don't display the Analysis results for assembly mass:
However it can show calculated mass on properties. My prior work shows both results:
I am clueless at this point.
Regards
-
Hi Guys. Cary is spot on this sync issue. I had exported a file that looks different from each other with the same time stamp.
-
Hmmm got it to work by setting it again on Apps.Default apps > Paint
-
1
-
-
Last week and yesterday embedding work on our template black area
or
this or this was working fine. This afternoon it stopped doing what it supposed to do. I have deadlines to meet 
. Even at my home pc it doesn't work anymore. Is it Windows 11 or IRONCAD itself, please advise what is going on.
This morning:
Kind regards,
Joseph
-
Hi All,
I just like to know your experiences, work around, do's and don't`s.
Regards to all
-
Got it to work by un-install and install the full install version. Patch didn't work flawlessly.
-
I noticed after the update, addition and subtraction no longer works:
: (
-
This seems to be a recurring bug with the pdf handling the BOM, this was fixed in IC2021 but seems IC2022 has it.
-
This work with me most of the time: on Options>Performance>Rendering>untick both Use Cached Graphical Display Data and Use Visual Load when Opening Files. regards
-
Hi Jim,
This what I did for my customers back then and I passed it to Mauricio for IC-Mechanical to have.
-
Thanks Kevin
-
James Webb
-
Thanks Kevin, however I like to know if I have to reconstruct the templates with jpeg logo as the current drawing templates do no not show the logo in IC2022 .
-
The strange thing when I edit the embedded object in Paint and resize i a bit, it goes back to display. When save it and open it next time is out again.
-
Just a note, hidden lines on ICD not showing dash lines
Regards
-
I have updated to Windows 11 and IC2021 is working excellent but stumbled on the ICD as my bmp logo on the templates is not displaying. Now it will display jpeg as it did not do before. Is thre a quick fix for this. I remember Kevin did a registry before for bmp. I tried to follow Malcolm's Exporting DWG Files - Embedding Images (logos) as Device Independent Bitmaps (for Windows 10 and 11), but I have to finish my work. Any advise is welcome and appreciated. regards
-
Tried Acis but still have a slight crease, rendering at 40 on the attached file.
-
It is about time Kevin to challenge the community to improve skill and IRONCAD's capability.
-
Got it to work this way with just single blade. I can then add the blades via the tri-ball linear pattern downwards. The final blade is a copy that needs to be trimmed according to the overall height required.
regards
-
On my so far it is working too. The only thing I hate is with Windows 11 is I can't move the task bar on top and the right click task manager is no longer at it. regards
-
Hi,
I been trying to get this done following this https://www.ironcad.com/blog/dynamic-parametric-cad-design/
so far it didn't go well
I always orient the extrude length on Z axis so on the bom all length will appear in the height column. Even trying to use the same naming convention doesn't allow me as follows below
This being done in IC2021. Appreciate any resolution or work around. The blade is in the position as in certain case it has to be trimmed with the damper height requirement. Blade spindle is set at 80mm center to center.
Regards
Connecting IRONCAD with MS Dynamics 365
in General Discussion
Posted · Edited by jolizon590016
update
Hi Team,
I just like to if anyone has experience on this topic. Will be be connected system or totally disconnected, any notes or documentation links will certainly be helpful . Appreciate the insights.
Best regards