jolizon590016

Hi Bill, Thanks for getting back on this, appreciate it. I did pass this information to our Service Delivery Manager. Hopefully something gets connected.

Hi Cary, Is there a reference for the rules or is it on the under help. Please advise, thanks again.

Hi Cary, Yes we wish to connect it with. Either if I can put in all the necessary conventions in IronCAD to be transferred to D365 to cut any redundancy/re-entry at D365. We were using a Priority ERP and migrated to D365. Priority was disconnected with IronCAD and we manually cross reference the model and ERP BOM. If I can set and drive some model properties e.g serial numbers, quantity, descriptions, material length to sent to D365. We don't use PDM to bridge. I may need to rewrite some rules which no expert at, any reference will be appreciated. Regards

Hi, I just like to to know if I pattern the layout in our current D365 to the IRONCAD Property List will it work or is it a big ask. Possibility question. Thanks

Hi Kev, The company hasn't migrated to IC2023. This work pc on boots up to scanning and repairing. The IC2022 goes to a period of good to the degenerates. Only this pc in the engineering team one drive network often goes to this. Also to note the back up directory only contains CopyFileAddress and no back up model file. Goes to flag enter large assembly just editing a size box when it is not. regards

IRONCAD24.0-03-02-2023-10-06-AM-ExceptionLog.txt In my opinion this may be IRONCAD's fault. My work pc has displays a disk error every boot up that the system tries to fix. Samsung utility reports no error but it seems it is more Windows installation problem as this issue cycles off and on. IronCAD was just re-installed and initially worked fine. Argh IRONCAD24.0-02-28-2023-07-17-AM-ExceptionLog.txt

Raster or Vector option is 15 mins with a file size of 32,335 kb

Hi Cary, With 15 pages, it took 38 mins . Had to check if it was using a Lpt1/parallel port Export to pdf 5,415 kb, print to MStoPdf 51,305kb

Hi Cary, MSPrint to PDF with Use zero-with line untick and with All sheets as Raster seems to work to my needs. I'll try with documentation with more pages. Thanks

I'll get back to you on that later, thanks

Hi Cary, If I use Microsoft Print to PDF takes a long time with 8+ pages and with Foxit it produces faint grey lines across the page. Export to pdf is tack sharp. I don't have a Print to PDF option if that is what you mean. regards.

I am still experiencing this annoying issue as I have to redo export 3-4 times to get it fixed. I have done all the recommended settings at Options>Technical Drawing>PDF Generation and still persist. Our office is still using IC2022 Version 24.0 Product Update 1 Service Pack 1 Hotfix 1. Regards to the Team

Hi TJ, What I do is just change my thinking on the stock. With Out Bend, the stock is 400x300, with the Bend there is a difference of 12.5mm (6.25mm offset/per bend - varies on stock thickness used) so I set the stock to 387.5x287.5. I know this quite tedious and annoying, but if you common stocks used, I made notes on this offset per stock thickness. Though it is wishful to have mitre done with all sort of bend features, it made me think and plan ahead. Sort of manual to semi automated thinking. regards joseph

Hi TJ and Willem, Is this how you want it to create? Use only Bend from the Sheet Metal Catalog as it will never work with any other as I have experienced. Open up Setback value as this a tight geometry. Others may have better knowledge than I would. regards. joseph Sheet Metal Part51.ics

Hi tgjang, You may change the order of your creation. Sheet_Metal_TestZ.ics

Hi RobH2, Very interesting subject. I don't mean to hijack hEinstein query but is there also away to deal with it on the BOM: length generated with 3 zeros, does precision displayed dialog will set this to? regards

Hi Harley, Thanks.

Hi Cary and Bertrand, Thanks for this. I wanted to reduce the file size. Initially my supervisor at work wants it shrink wrap but turns out removing the face plate or the fan hole even all is selected. I used combined shapes but still experience a large files size on my end. The results vary at the office machine, compared to my home pc. I usually set assembly with a Specified Mass and Treat as part or the actual A/C assembly.

Hi, I hope someone shares their thoughts on this stp file when saved to IC is 31K in sized. I have combined the shapes, did a shrinkwrap that removes the face frame. Saving to IC Compose model did reduce the sized but does not feature the specified mass to compute total assembly when used with. Regards to all ZIEHL-ABEGG_L-AL-GR01324_Index_000_GR45C-ZID_GG_CR_2019-05-28.zip

Hi Willem, I just did importing it to IC2023 and it went in without a hitch. Do you have a third party one that is not restricted or confidential that I may try on my end just to test and isolate. regards again.

Hi Willem, I just installed IC2023. I have exported a sheet metal tray as STP A214 and imported it back. Maybe it was simple tray model. Kind regards, Joseph Drain Tray - PHIA1_CX2.stp

Ok Cary, thanks.

Hi Team, I just like to if anyone has experience on this topic. Will be be connected system or totally disconnected, any notes or documentation links will certainly be helpful . Appreciate the insights. Best regards

Experimentation I tried and gave up on back then 200804.ics

Hi Cary, I'll try this with my home pc. It is also struggling to generate the COG. Odd.