jolizon590016

Sometimes it does because it happens so occasionally.

NewICScreenRecord.avi If I proceed with old interface it opens up an error warning window that screen recorder failed to save earlier

Hi Kevin, I'll try to recreate on my lunch break. Regards

Hi, In doing sweep feature with the s key, sometimes displays the old dialog appears rather than the side bar feature. The old one no longer works, is there a way to prevent that being used? Regardss

Hi, Thank you so much, this link worked. regards

Hi Maurizio, My pc browser (Firefox and Edge) doesn't allow ftp from the link posted. Please advise and alternative or work around, thanks. Regards

Hi Mauricio, Thanks for the update. I will check it out tonight. Hi Spencer, I am surprised and with a chill in my on my back that it did not worked on your AMD home system. Hi Kim, I hope it worked on your end. Regards

This is the project: The face to dxf executed the left hand panel while the right hand panel lost the screw holes. I deleted the dxf previously but the Unfolded RH Vat Panel V8 T2,0 [SED SS316 2,0] 9T2) pdf (5900x cpu)was from the actual dxf. Unfolded RH Vat Panel V8 T2,0 [SED S316 2,0]n.dxf (5950x) was just done a while ago again with face to dxf and was executed flawlessly. The file dates will show when it was done. So in doing 21 unfolded sheet metal face to dxf operations, 1 may not execute as it is. Unfolded RH Vat Panel V8 T2,0 [SED SS316 2,0] (T2).pdf Unfolded RH Vat Panel V8 T2,0 [SED SS316 2,0]n.dxf LH Vat Panel V8 T2.0.ics RH Vat Panel V8 T2.0.ics

It actually works, but some sheet metal parts in the assembly randomly fail to do so. I will post the part tonight after work also to illustrate.

I have sheet metal work when unfolded still have the screw holes intact, however when face to dxf holes is used, holes randomly are not created. This part has a similar left hand part which the face to dxf had the screw holes in it. I can't compare it with intel based system as I don't have access to one. It was done also with 5900x machine which was upgraded to a 5950x recently to extend the worth of 64 gb ram already installed. I plan to learn about fluid/air flow analysis this holiday break in December.

I am not sure if my findings is conclusive, I usually run Spec org CPU on my pc build and sort of encounter error on the the Rodina with G. Skill memory. I have stayed away from those.

I understand where you are coming from, that is how it looks with my old HP that is why I set it to DX11. With my Asus Vivo Workbook 7730U, I was surprised it worked the other way around. It might be AMD updated their drivers or Windows 11 fixed it. I have switched my home machine to Opengl2 from Dx11 and it works fine when it previously worked the same way you have stated. this is an improvement. I just shifted on also this office Nvidia Quadro P2000 I am replying from and it is also fine. Regards Joseph

Hi Kim, My errors are on the work pc at the office. I'll try to to look for one, if I can. Also just before changing the cpu: the catalog browser width keeps changing when I switch from drawing to 3D scene, user profile that gets corrupted 3x in my 2 years on that machine and random saving errors on onedrive. Are you also experiencing weird stuff lately?

I finally resolve this by a simple switch from DX11 to Opengl2 on the rendering settings of IRONCAD, why didn't I explored it earlier. I can open large assemblies with ease without a hitch h:( (slap on the forehead). With that said, how long will opengl2 be to supported by IRONCAD and what hold in the future.

I finally found the culprit - buggy Ryzen 5 5600X CPU on the office workstation, since I replaced it with my older Ryzen 9 3900X CPU it all worked well.

Oh my. Duh moment too.

Hi Kevin, The drawing opened but the selected parts to project got messed up. Prior to the error, it did print the sheets in pdf without any problem. Maybe I had the browser running with youtube video to keep me company wasn't a great idea as in the past.

Hi Kevin, It is on my local drive on my home pc. I tried saving it with a different file name and did the same thing. I did save the model but not the drawing. I will check that local ssd D drive when I get home from work later. Regards,

Hi Team. First time to encounter this:

Ballistic

Hi Dan, It is not a car but something like this? Shoe_Sole_Liner_tutorial.pdf

Thanks Kevin

You Hopper model with a Mirror is the problem. Using the Convert to Sheetmetal part resolves it.

It is with the L anchor short leg where it points opposite is 0° at. I used cap more often before with Trispectives where it showed the point of the cap you can move around to offset the cap of center, useful as surface control. It disappeared when it was IC.

You are on the right track doing a customize symbols and using it as an catalog item. Just make sure you have labeled and saved your own catalog. Cheers