handersson
-
Posts
90 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Downloads
Articles
Gallery
Posts posted by handersson
-
-
-
www.magictracer.com/
This seems to be a nice option.
Open an image, convert to vector, save as DXF, import to IC, extrude to 3D.
$59.95
regards
Henrik
-
Hi!
A customer recently had lots of problem updating ICD (created back in IC 10).
BOM did expand, dimensions lost attachment, custom properties gone etc.
This was caused by a Windows Update!
Windows Update KB973923
(security update..ms visual C++ 2005 sp1 . ..)
Removing that solved the problem!
(It's possible to get a list of installed updates on your PC at Win. update and you can block this one from being installed)
/Henrik
-
2D Shapes created before PU1 can cause problem when opened in PU1.
We found that in some cases 2D shapes in a Scene caused problem,
when trying to create section in ICD.
This cases was in rather big assys, linked copies etc.
regards
Henrik
-
Important: IC9 PU1
In Tools/ Options/ Directories/ Working Directory:
if above is set to server etc. on Network- it may slow down opening.
Especially if there are external linked files.
If above is set your local PC - solves issue.
regards
Henrik
-
To avoid these problem - in IronPro the Std. description (type, length, thread) of the fastener can show up as default in Part No. in Part Prop.
If not changed, all the same is summed up in BOM.
/Henrik
-
One user has this situation, IC 7 PU1, HP DesignJet 750c 00, latest HP driver:
- using std iso format for printing a4 - a0: No problem (on any printer).
- to avoid "shrink" due to printer margins = to keep scale 1:1 on printed
paper, they use to set special paper size in printer dialog, slighly
bigger than std.
Result ok in IC 6.2.
In IC 7 PU1 : application error
- it seems that IC 7 is affecting printer driver in a way that IC 6.2 (and
earlier) did not.
- temp. work around, go thru PDF?
regards
Henrik
-
It will set 60 days of Trial days to 0 days left (if IC is not reg. yet or dongle activated).
A process used by Network license is stopped due to higher security, easy fixed by allowing it again. This is only interesting if using Network licensing.
regards
Henrik
-
Info from a user, this did work for them:
1. XP with /3GB boot.ini + patch
2. Get XP updates (from Microsoft online)
3. Install IC 6.0 - No PU2(!), just 6.0.
No low memory probl. after this.
No boot probl. after this.
Henrik
Solidmakarna
-
This is very useful method when trying out the stroke length of a pneumatic or hydraulic cylinder, or place the attachments.
You can quick simulate the cyl. with a smart dimension to see the attachment move OR you can rotate the att. with Triball to see what length of cyl. is needed. Smart dim. can drive OR be slave!
You can even move around the place of attachments (intellishapes on plate).
You only need 2 constraints, It is Colinear and Align.
1: Coliear the Attachment to axle.
2: Align Attachment to end of axle (smart dim to 0 - not ok)
3: Applie smart dim.
(The smart dim. must bee applied at same "plane" to be correct.)
Of course you may need to replace Smart dim with a Cyl. later on to see if it is space for it.
regards
Henrik
-
Hi!
I tryed with a smart dim. representing a cyl. to check what happens
with attachment angle.
or
Rotate attachment w. Tribal for see what length is needed on a Cyl.
See file.
Henrik
Solidmakarna
Structured Parts - Key Differences (Document and Videos)
in General Discussion
Posted
Very nice! Extremly useful. Big thanks Malcom!