aalbè

it could be that in the background (previews or other file related services) keep running and (with win11) explore.exe does not free memory.

Could it be related to preview management? this option was introduced in the 2021 version

In structured parts if you position at a specific point (center, vertex or midpoint) it constrains there, you have to right click on the section -> and edit geometry or origin point Structured.mp4

embossed2022.ics Here is the file, it is slightly different, but the process is the same... Angelo

Hi Marcelina, you can model it as full then use shell to empty it Angelo embossed.ics

Yes, it is true, look at the two pages of the manual: http://ironcad.it/learnICM/en/tools-catalog/proactive-manager/bom-settings/015_proactive_bom_setting/#file-and-customdata-properties http://ironcad.it/learnICM/en/tools-catalog/proactive-manager/dialog/010_proactive_mgr_dialog_properties/#utility-and-custom-data but in this case custom data is added to parts/assemblies only when using IC MECH and not when adding a part to the scene.

Hi HCMFab, I used Add Miter (in Sheet Metal Ribbon Bar) for the first SM and HBlock for the other cuts Toolbox Miter 01.ics

Try this link: http://ironcad.it/download/ICMechanical/ICMechanical_25.11.08_X64.exe

Sure, if you want to get a convex grip, it is much better to approach it using lofts ;-)

I made it with an extruded section (So you can easily change, and also a Draft to widen the back) and normal Constant Bends and with Bend-Full Round and with Bend-Hold Lines (I named the bends) Electric tool 001.ics

Hi Hdear, you can choose what to export in the Settings -> MSExcel Export Options dialogue box http://ironcad.it/learnICM/en/tools-catalog/proactive-manager/bom-settings/015_proactive_bom_setting/ http://ironcad.it/learnICM/en/tools-catalog/proactive-manager/050_proactive_mgr_export/

I think it is Group AF1, contains an Hcylinder that drills part1 if you delete it, the animation becomes smooth again

Hi tgjang, you can use Elements Along 3DCurve in the IC mechanical tools catalog, put the anchor in the center of the chain link and orient it along the tangent of the curve and find the correct number of pieces. you can't, however, tie the chain to the curve... Chain.mp4 Chain test A.ics

Ciao Emil, is because you can add more views of the symbol (such as projections, or sections) in your case you can put the door open and closed (if there are dimensions, you can add parameters to dimension the symbol) Symbol.mp4

Hi Tyler, for internal links you can use the Replace Element Tool whit the option Replace in place here the manual page: http://ironcad.it/learnICM/en/tools-catalog/0350_replace_element/#replace-in-place https://www.youtube.com/watch?v=dMgTlxe-Iig&t=1s