Jump to content

License Activation Patch for V11


IronKevin

Recommended Posts

Subject: IRONCAD/INOVATE V11.0 License Update Notice!

 

To: IRONCAD and INOVATE Version 11.0 Users Running on Windows 32-bit OS.

 

Issue: Activation of Licenses will fail to complete properly.

 

Requirement: After installing IRONCAD/INOVATE Version 11.0, download and install the following patch to your machine.

 

* IRONCAD V11.0 32-Bit OS Version License Patch:

IRONCADV11LicenseUpdate

 

* INOVATE V11.0 32-bit OS Version License Patch:

INOVATEV11LicenseUpdate.exe

 

 

 

Dear Valued Customer,

 

We at IronCAD greatly appreciate your continuous support and would like to apologize for the extra effort required for the activation process for IRONCAD 11.0. Due to product changes and our current license database, additional changes are required to the release version of IRONCAD and INOVATE running on 32-Bit OS. Thank you for your understanding and support and we hope you enjoy IronCAD version 11.

 

Sincerely,

 

IronCAD Support Team

Link to comment
Share on other sites

Guest jkim522093

Good to have the Hotfix.

But in Installshield Wizard, title of the window says Hotfix 4 while title in the window

says Hotfix 1, which might give some confusion to the customers.

1.BMP

 

JH

Link to comment
Share on other sites

The problem doesn't exist on 64bit.

23256[/snapback]

 

As Kevin says. The license activation patches that have been provided are ONLY for the 32-bit versions of IRONCAD/INOVATE.

There is not license activation patch needed for the 64-bit versions of the products.

Link to comment
Share on other sites

Good to have the Hotfix.

But in Installshield Wizard, title of the window says Hotfix 4 while title in the window

says Hotfix 1, which might give some confusion to the customers.

23252[/snapback]

 

...in additional to that, there is no indication (that I can tell) that the patch is installed on the "Help -> About" dialog...

 

But I guess if you are running a registered 32-bit version, you can pretty much assume its has been done.

Link to comment
Share on other sites

Guest jkim522093
...in additional to that, there is no indication (that I can tell) that the patch is installed on the "Help -> About" dialog... 

 

But I guess if you are running a registered 32-bit version, you can pretty much assume its has been done.

23262[/snapback]

I know, and thi shotfix installed correctly without any problem.

What I want to point out is that the HotFix nimber is shown incorrectly during the installation of this HF.

In the Installshield, title says HotFix 4, while the contents of that Installshield is Hotfix 1, so this might cause some confusion.

 

JH

Link to comment
Share on other sites

Issue: Activation of Licenses will fail to complete properly.

 

Requirement: After installing IRONCAD/INOVATE Version 11.0, download and install the following patch to your machine.

 

23251[/snapback]

 

 

Well, I did install the patch, but my Inovate 11 installation still doesn't notice it's a licensed version instead of a demo.

 

What I did:

 

1. Install Inovate 11 from CD

2. Run patch downloaded from above

3. Run activation wizard, activate via internet, successfully finished

3. Launch Inovate and ... get the Registration dialog, which asks me if I want to run the demo or register and activate. Huh?

4. Select "register" again, enter my info... and get an error message when the Inovate license file should be written. Well, yes, it's already existing, I think.

5. I completely uninstalled and re-installed Inovate again

6. Applied the patch

7. Launch Inovate, this time without running the activation wizard first

8. Complete the registration/activation process, which appears after first launch

9. License was successfully installed

10. Launch Inovate... AND HAVE TO REGISTER AND ACTIVATE AGAIN!

 

System: XP Pro SP2 (32-bit)

 

How can I get this &%$§ thing running?

 

Bernd

Edited by Bernd Meißner
Link to comment
Share on other sites

Couple things to try:

 

1) Install this driver for the dongle:

ftp://ftp.ironcad.com/download/SPI750W.zip

 

 

2) Try manually installing the license:

 

Use the Email activation option

If the double-clicking the incoming license file fails:

 

In this case you will need to copy the license file into place manually:

 

1. Copy the IVBNUS11-******.icl file to \Program Files\IronCAD\11.0\bin

2. Rename \Program Files\IronCAD\11.0\bin\lservrc to \Program Files\IronCAD\11.0\bin\lservrc.old

3. Rename \Program Files\IronCAD\11.0\bin\IVBNUS11-******.icl to lservrc (no file extension)

 

At this point Inovate should start.

Link to comment
Share on other sites

Couple things to try:

 

1)  Install this driver for the dongle:

ftp://ftp.ironcad.com/download/SPI750W.zip

 

23337[/snapback]

 

 

Thanks, updating the dongle driver did it, although this has been working for versions 8 through 10 without a problem. The demo/registration dialog is gone for now, without doing the activation process again. So let's see what happens in 29 days ;-)

 

Thanks again,

Bernd

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...