Jonas@Solidmakarna Posted April 8, 2016 Share Posted April 8, 2016 Here's a part with negative letters which you can use to project or copy from. The letters are based on the free (CC) "pn box" font - http://fontstruct.com/fontstructions/show/95200/pn_box All curves are made with arcs, not polylines. Edit: Each letter is now also available with scalable Sizebox handles. ICS: ABC.ics DXF: ABC.dxf Here's a catalog with the letters as well. ICC: ABC.icc Quote Link to comment Share on other sites More sharing options...
Jonas@Solidmakarna Posted May 10, 2016 Author Share Posted May 10, 2016 This post should be moved to Bug Reports! First I've noticed that the anchor point is reversed on all letters - making them "float in space"! Sorry about that! At first I thought that I had made a mistake. So I made a new catalog to replace the one above, but even when the new catalog was opened on another computer all the hollow shapes had their anchor point reoriented 180 degrees around the short X anchor point axis! It is easy to reproduce. Drop one of the letters on a block, reorient it and make sure the long anchor point Z axis is oriented away from the shape. Drop it into a catalog, then save and close the catalog. Open it again and drop the shape - the anchor has now been rotated 180 degrees around the short anchor point X axis again! Please have a look at this. Quote Link to comment Share on other sites More sharing options...
Guest TCHITANDA Posted May 10, 2016 Share Posted May 10, 2016 This post should be moved to Bug Reports! First I've noticed that the anchor point is reversed on all letters - making them "float in space"! Sorry about that! At first I thought that I had made a mistake. So I made a new catalog to replace the one above, but even when the new catalog was opened on another computer all the hollow shapes had their anchor point reoriented 180 degrees around the short X anchor point axis! It is easy to reproduce. Drop one of the letters on a block, reorient it and make sure the long anchor point Z axis is oriented away from the shape. Drop it into a catalog, then save and close the catalog. Open it again and drop the shape - the anchor has now been rotated 180 degrees around the short anchor point X axis again! Please have a look at this. 42898[/snapback] Hello Jonas, I have filed this as a bug report Incident ID#:106854 ~Tito Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.