Jump to content

ysinitsyn

Channel Partners
  • Posts

    379
  • Joined

  • Last visited

About ysinitsyn

  • Birthday 09/12/1984

Contact Methods

  • Website URL
    http://
  • ICQ
    346139379

Profile Information

  • Location
    Ekaterinburg, Russia

ysinitsyn's Achievements

Sphere

Sphere (5/9)

1

Reputation

  1. 1. Delete pattern 2. Move bolt to assy 3. Recreate the pattern
  2. In some cases 4k resolution made very small icons (buttons) in a software. Any body try to use IC in this case?
  3. Hello. "Pipework Layout Sketch" - it is good idea. But, I think, more traditional way is first of all to create a pipe line, using 3D curve or/and 2D curves. Then place to this curves a fittings and pipes from a catalogs. As you see, need to prepare fitting library for your needs. 3D_pipe_line_IronCAD.mp4
  4. I agree, that camera tools must be enhanced. I think, easiest way is move the model, using Tribal. Not a camera. Using ideas from SketchUp lessons. Create sketch with long 2D lines (XYZ) and using Tribal align this "axes" along the edges of the object in the picture. In this case the plane for future modeling will be placed as needed for you.
  5. What about the software for free form sculpting? Some times ago we talked about one in this forum.
  6. Splitting the window not very useful in my case. Because, even in separate window I can not see thru the camera in the Key of the Path. New window shows only view from first Key in the Path. Will be useful if I'll can see thru camera (in any selected Key) when moving the Key using Triball, for example. If the cameras disappeared in scene, try to Recreate Display. Some times this helps.
  7. I think, will be very handy some tool like Save camera. But the data will strore to the Keypoint of the Path. For example, user can choise save to keypoint 1, 2 or 3 and etc.
  8. Hello! How you create the amimation of the camera? I think, very difficult to setup the Keypoints, because you not know what you will see thru this camera. Any tips?
  9. Thank you, Mike! Very interesting to know the opinion of real users.
  10. Tom, Do you mean that most useful thing in the device like that is hardware buttons for hotkeys?
  11. I know some of IC users are working with 3D mouse, like 3DSpacePilot. Just want to know what do you think about a devices like this?
  12. Use the edge of the elliptical shape, instead a sketch. Or extract the 3D Curve from the sketch and use the 3D Curve as a trajectory for the pattern.
  13. Old trick with Sweep command and twisting the crossection. Unfortunately, don't working with closed trajectory. See the file. mobius.ics
×
×
  • Create New...