Welcome Guest ( Log In)

 
Reply to this topicStart new topic

Outline · [ Standard ] · Linear+

> ABC... letters for cutting

Jonas@Solidmakarna
post Apr 8 2016, 06:00 AM
Post #1


I-Beam
*******

Group: Channel Partners
Posts: 1,407
Joined: 22-September 04
From: Sundsvall, Sweden
Member No.: 1,692



Here's a part with negative letters which you can use to project or copy from.
The letters are based on the free (CC) "pn box" font - http://fontstruct.com/fontstructions/show/95200/pn_box

All curves are made with arcs, not polylines.
Edit: Each letter is now also available with scalable Sizebox handles.

ICS: Attached File  ABC.ics ( 1.22mb ) Number of downloads: 171

DXF: Attached File  ABC.dxf ( 358.16k ) Number of downloads: 144


Attached Image

Here's a catalog with the letters as well.
ICC: Attached File  ABC.icc ( 1.69mb ) Number of downloads: 185


Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jonas@Solidmakarna
post May 10 2016, 03:44 AM
Post #2


I-Beam
*******

Group: Channel Partners
Posts: 1,407
Joined: 22-September 04
From: Sundsvall, Sweden
Member No.: 1,692



This post should be moved to Bug Reports!

First I've noticed that the anchor point is reversed on all letters - making them "float in space"! Sorry about that! blush.gif
At first I thought that I had made a mistake. So I made a new catalog to replace the one above, but even when the new catalog was opened on another computer all the hollow shapes had their anchor point reoriented 180 degrees around the short X anchor point axis!

It is easy to reproduce. Drop one of the letters on a block, reorient it and make sure the long anchor point Z axis is oriented away from the shape.
Drop it into a catalog, then save and close the catalog. Open it again and drop the shape - the anchor has now been rotated 180 degrees around the short anchor point X axis again!

Please have a look at this.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
TCHITANDA
post May 10 2016, 09:51 AM
Post #3


Sphere
****

Group: IronCAD Employees
Posts: 270
Joined: 4-April 16
Member No.: 72,379



QUOTE(Jonas@Solidmakarna @ May 10 2016, 04:44 AM)
This post should be moved to Bug Reports!

First I've noticed that the anchor point is reversed on all letters - making them "float in space"! Sorry about that!  blush.gif
At first I thought that I had made a mistake. So I made a new catalog to replace the one above, but even when the new catalog was opened on another computer all the hollow shapes had their anchor point reoriented 180 degrees around the short X anchor point axis!

It is easy to reproduce. Drop one of the letters on a block, reorient it and make sure the long anchor point Z axis is oriented away from the shape.
Drop it into a catalog, then save and close the catalog. Open it again and drop the shape - the anchor has now been rotated 180 degrees around the short anchor point X axis again!

Please have a look at this.
*



Hello Jonas,

I have filed this as a bug report
Incident ID#:106854

~Tito
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicTopic OptionsStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 

All content copyright IronCAD 2000-2008 Low-Bandwidth View Time is now: 20th November 2017 - 02:45 AM